Notes:
•Be sure not to press any of the TAD’s buttons while you are plug- ging the adapter into the AC out- let. If you accidentally press a button, reset the TAD by unplug- ging the adapter from the AC out- let and reinserting it.
•The TAD cannot operate without AC power.
INSTALLING THE BACKUP BATTERY
If the AC power fails or you unplug the TAD, a 9V backup battery (not sup- plied) saves the messages and the settings for the day, time, and security code. We recommend you use an al- kaline battery, such as Radio Shack Cat. No.
1.To remove the battery compart- ment cover on the bottom of the TAD, remove the screw with a small Phillips screwdriver, then lift off the cover.
illustration
2.Snap the battery’s contacts firmly to the battery connector, then put the battery into the compartment.
illustration
3.Replace the cover, then reinsert and tighten the screw.
Replace the battery if the LOW BATT. indicator turns on while the AC adapter is properly connected.
illustration
Cautions:
•Before you replace the battery, be sure the supplied adapter is securely connected to an AC out- let and to the jack on the back of the TAD. Otherwise, you might lose any stored information.
•Always use a fresh battery of the required size and type.
•Dispose of the battery promptly and properly. Do not bury or burn it.
7