2.Press 1/TIME. The TAD says “Press one for Monday. Press two for Tuesday. Press three for Wednesday. Press four for Thurs- day. Press five for Friday. Press six for Saturday. Press seven for Sunday.”
illustration
3.Press a number button to set the day of the week. The TAD says the day of the week and “Enter the time.”
4.Press two digits for the hour. The TAD says the hour.
Note: If you make an invalid entry (for example, 00 or 13), the TAD beeps three times and repeats “Enter the time.”
5.Press two digits for the minute. The TAD says the minute and “Press one for AM, two for PM.”
Note: If you make an invalid entry (for example, 66), the TAD does not respond. Make a correct entry within 7 seconds.
6.Press 1 or 2. The TAD says the current day and time.
To hear the current day of the week and time at any time, press TIME.
SETTING THE NUMBER OF RINGS
The TAD is preset to sound 4 rings be- fore it answers the first call. Follow these steps to change the number of rings (from
Notes:
•If you plan to check your mes- sages by long distance, set the number of rings to at least four to avoid unnecessary long distance charges when you call by remote to check your messages (see “Using the Toll Saver”).
•In Steps 2 and 3, you must enter your selection within 7 seconds. otherwise, the TAD beeps three times then exits the programming mode. If this happens, start over again at Step 1.
illustration
1.Press PGM/DEL. The TAD beeps once.
2.Press 3/RING. The TAD beeps once.
3.Enter the number of rings you want (up to 9). The TAD repeats the number, then beeps twice.
9