Preparation, Setting the DAY and Time

43-781.fm Page 8 Monday, August 16, 1999 7:41 AM

PREPARATION

Complete the procedures in this sec- tion before you set the TAD to answer calls.

Notes:

•The keypad is located under the cover on the front of the TAD. Lift the cover to access the keys.

Notes:

•Once you turn the TAD on, it is set to answer calls (see “Setting the TAD to Answer/Not Answer Calls”).

•You can also turn the TAD on remotely (see “Remote Answer- On”).

illustration

SETTING THE DAY AND TIME

•Before you begin any of the pro- cedures in this section, be sure the TAD is turned on (see “Turning the TAD On/Off”).

TURNING THE TAD

ON/OFF

To turn on the TAD, simply press ON/ OFF so ON LINE turns on.

illustration

To turn the TAD off, press ON/OFF again so ON LINE turns off.

You must set the current day and time so the TAD will record the day and time (date stamp) on each memo, incoming message, and 2-way conversation it records.

Notes:

•If you do not set the date and time, the TAD will not record a date stamp.

•In Steps 2-6, you must enter your selection within 7 seconds after the TAD finishes saying the instruction. Otherwise, the TAD beeps three times, then exits the program mode. If this happens, start over again at Step 1.

1.Press PGM/DEL. The TAD beeps once.

illustration