Radio Shack TAD-1009 owner manual Fm Page 20 Monday, August 16, 1999 741 AM

Page 20

43-781.fm Page 20 Monday, August 16, 1999 7:41 AM

4.Within 7 seconds, enter your selection (see “List of Remote Commands”).

Notes:

If you do not press a button within 7 seconds, the TAD hangs up.

To delete a message the first time you hear it, you must press 8 immediately after the caller’s message ends but before the TAD beeps to start the next message or function. However, if you are repeating a message, you can press 8 at any time before the message ends.

After you enter a remote com- mand, the TAD is preset to beep twice after about 160 sec- onds, then automatically hang up after about 180 seconds if you do not enter another com- mand. If you are listening to your messages and the TAD- 1009 beeps twice to warn you that it is about to hang up, you can press 7 to repeat the cur- rent message and reset the TAD-1009’s time cycle.

If your telephone line has CPC service and you hang up while the TAD is playing back the messages, it stops playback immediately and resets to answer the next call.

If you do not have CPC service and you hang up while the TAD is playing back the messages, the TAD might not recognize that you hung up. If someone calls while the TAD continues to play the messages, the caller hears a busy signal. We recom- mend that you play all the mes- sages or skip forward through the messages using remote commands until the TAD beeps once before you hang up. This is to ensure you hear all your messages.

5.After completing the selected function, the TAD beeps once then plays the next recorded mes- sage (if you are playing back mes- sages) or begins re-announcing the list of selections. Enter a new command or hang up the phone.

20

Image 20
Contents TAD-1009 Features Outgoing Message Remote Skip Read this Before Installation FCC StatementContents Installation Connecting AC AdapterInstalling the Backup Battery Turning the TAD ON/OFF Setting the DAY and TimePreparation Setting the Number of Rings Checking/Deleting the Outgoing Announcement Recording AnnouncementsRecording the Outgoing Announcement Recording the Memory Full Announcement Checking/Deleting the Memory Full AnnouncementAnswering Calls Setting the TAD to ANSWER/NOT Answer CallsBasic Operation Recording Announcement-Only Message Turning Announcement-Only On/OffChecking/Deleting Announcement-Only Message Screening CallsRecording a 2-WAY Phone Conversation Playing Incoming Messages Recording a MemoPlaying Messages Playing 2-Way Conversations Playing MemosDeleting Messages Changing Remote Code Using the Toll SaverRemote Operation Using Remote Commands Remote ANSWER-ONFm Page 20 Monday, August 16, 1999 741 AM List of Remote Commands Number Press ToPROBLEM-SOLVING Problem Cause RemedyFm Page 23 Monday, August 16, 1999 741 AM Resetting the TAD Care and Maintenance FCC Wants YOU to Know LightningFm Page 27 Monday, August 16, 1999 741 AM Radio Shack