•If the caller hangs up or is silent for more than 7 seconds, or if the incoming message is less than 2 seconds in length, the TAD hangs up and resets to answer the next call, but does not record a mes- sage.
•If the TAD answers when the memory is full, it plays the mem- ory full announcement and beeps, waits 7 seconds for any remote operation commands (see “Using Remote Operation Commands”), then hangs up. The TAD cannot record additional messages until you delete at least some of the old ones (see “Deleting Messages”).
USING THE ANNOUNCEMENT-ONLY FEATURE
Your TAD’s
Note: When the TAD is set for
Recording the
Announcement-Only
Message
1.Press ANN ONLY so the ANN indi- cator turns on, then press and hold OGM until the TAD beeps once and the ON LINE indicator flashes.
illustration
2.Release OGM and record your message. Speak into the TAD from about 12 inches away.
3.When you finish speaking, press ON/OFF. The TAD beeps once, the
Turning Announcement-Only On/Off
To turn on the
To turn off the
13