Radio Shack 43-3888 owner manual Operation

Page 12

Operation

than 7 seconds, or the maximum message length is reached, the system hangs up and resets to answer the next call. The number flashes to indicate a new incoming message has been recorded.

When the system is answering a call or recording a message, if any phone on the same line is picked up or the system detects a Calling Party Control (CPC) signal, it stops playing the outgoing message or recording an incoming message and resets to answer another call.

Many local phone companies use Calling Party Control (CPC) to signal that the caller has hung up. Your system can recognize a CPC signal and release the line. If the system records phone company messages or dial tones, your local phone company probably does not use CPC.

If FL flashes on the display, the system’s memory is full. It answers calls after 10 rings. The caller hears “No one is available to take your call” when the system answers, and the caller cannot leave a message. The system then hangs up. The system cannot record additional messages until you delete some of the old

12

Image 12
Contents Read this Before Installation FCC StatementFCC Statement FCC Wants YOU to Know Features Features Installing the Backup Battery Connecting AC PowerPreparation Connecting the System to a Phone Line Setting the DAY and Time Turning the System ON/ OFFSetting the Number of Rings Hour until you hear or see the correct hourSetting the Incoming Message Length Recording the Outgoing MessageSetting the System to Answer Calls OperationOperation Using ANNOUNCE-ONLY Recording a Memo Screening CallsRecording a TWO-WAY Phone Conversation Playing Incoming MESSAGES/MEMOS TWO-WAY Phone ConversationsOperation Remote Operation Deleting MessagesSecurity Code Remote Commands Operating the System from a Remote LocationService and Repair CareRadioShack Corporation