Radio Shack 43-3888 owner manual Turning the System ON/ OFF, Setting the DAY and Time

Page 8

Preparation

Ô NOTE Ô

Hold down SKIP/

TIME SET/CHECK

continuously for Steps 1–4.

TURNING THE SYSTEM ON/ OFF

To turn on the system, press ON/OFF/ STOP. The display lights and the system sounds a tone. The system is set to answer calls.

To turn it off, press ON/OFF/STOP. The display turns off and the system sounds 2 tones.

ADJUSTING THE VOLUME Push down or pull up VOLUME / to increase or decrease the volume. The system sounds a tone when you change the volume.

SETTING THE DAY AND TIME

The day/time voice stamp automatically defaults to Monday, 12:00 AM when you connect the system to power.

1. Turn on the system. Hold down SKIP/TIME SET/CHECK. The system sounds a tone after 1 second.

2. While holding down SKIP/TIME SET/CHECK, press REPEAT/ANNC/ DAY. The system announces “Monday” and 01 appears on the display. Repeatedly press REPEAT/ ANNC/DAY until you hear or see the correct day.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Read this Before Installation FCC StatementFCC Statement FCC Wants YOU to Know Features Features Preparation Installing the Backup BatteryConnecting AC Power Connecting the System to a Phone Line Setting the DAY and Time Turning the System ON/ OFFSetting the Number of Rings Hour until you hear or see the correct hourSetting the Incoming Message Length Recording the Outgoing MessageSetting the System to Answer Calls OperationOperation Using ANNOUNCE-ONLY Recording a Memo Screening CallsRecording a TWO-WAY Phone Conversation Playing Incoming MESSAGES/MEMOS TWO-WAY Phone ConversationsOperation Security Code Remote OperationDeleting Messages Remote Commands Operating the System from a Remote LocationService and Repair CareRadioShack Corporation
Top Page Image Contents