GE 0007634, 28165xx6 Three-Way calling, Transferring External Call to Other Handsets or Base

Page 35

Three-Way calling

Between two handsets or a handset and base and an external call

1.During an external call, press the int button on the handset or base and the external call is placed on hold. The list of handsets or base show in the display.

2.Use the 5 or 6 button to select desired handset or base. A tone sounds and PAGING shows in the originating handset or base display.

NOTE: PAGING FROM… shows in the display on the receiving handset or base, and the receiving handset or base must press the int button or the OK (SKL) to answer the intercom.

3.When the receiving handset or base connects, press the UNHOLD (SKR) on the originating handset or base to conference with the receiving handset or base and the external caller. CONFERENCE shows in the display on the originating and receiving handsets.

NOTE: A handset or base can enter conference mode directly by pressing the LINE 1 or LINE 2 button on the second handset or base during a call.

Between a handset or base and external calls on the Line 1 and Line 2

1.During an external call on either LINE 1 or LINE 2, press the HOLD (SKR) to put the call on hold.

2.If the originating line is LINE 1, press the LINE 2 button. LINE 1 icon flashes and LINE 2 icon shows in the display steadily.

3.Press the CONF button to conference with the external call.

Transferring External Call to Other Handsets or Base

During an external call, you may transfer the external call to another handset or base.

1.Press the int button on the originating handset or base to put an external call on hold, and then page the receiving handset or base.

2.The list of handsets or base shows in the display. Use the 5 or 6 button to select desired handset or base.

3.Press the SELECT (SKL) to start the page. You will hear a paging tone. PAGING shows on the originating handset’s display or base display, and PAGING FROM…. shows on the receiving handset’s display or base display.

4.When the receiving handset connects, press the END/CANCEL button on the originating handset or base to transfer the call.

-OR -

Press the END/CANCEL button on the originating handset or base to transfer the call.

35

Image 35

Contents Page Notification to the Local Telephone Company Equipment Approval InformationLicensing Interference InformationHearing Aid Compatibility HAC Information for Dect Product FCC RF Radiation Exposure StatementTable of Contents Base Speakerphone Introduction Telephone Jack Requirements Parts ChecklistBefore You Begin Digital Security System InstallationImportant Installation Guidelines Handset Layout Tone Base LayoutInstalling the Handset Battery Installing the PhoneConnecting the Base Station Installing the Base StationInstalling the Backup Batteries on Base Unit Wall Mounting the Base Base Speakerphone Set UpSpeakerphone Volume Using the Soft KeysBase Name Base Voice/Display Prompt LanguageDate Format Base Date/TimeSet Date/Time Time FormatBase Ringers Tone/PulseBase Set Local Area Codes From the Ringer Menu Base Ringer VolumeBase Ringer Tone Base VIP Melody ToneAnswer ON/OFF Answerer SetupBase Key Tone Changing the Outgoing Announcement Outgoing AnnouncementReviewing the Outgoing Announcement Recording the Outgoing AnnouncementSet Forwarding Messages Base Rings To AnswerSecurity Code Forwarding MessagesNumber of Retries Forwarding Messages ON/OFFView Unit ID Messages Handset Telephone Set UpHandset Display Prompt Language Storing Caller ID Caller IDReceiving Caller ID Delete Caller IDHandset Ringer Tone Handset Ringer VolumeHandset Ringers Handset Key Tone Handset RegistrationHandset VIP Melody Handset Date/Time Handset NameRoom Monitor LanguageAnswering a Call Handset Setting Local Area CodesCharge/In Use Indicator Basic OperationMute VolumeFlash Number RedialGlobal De-registration HoldPaging the Cordless Handset Call Transfer Making an Intercom Call Intercom OperationPush to Talk Receiving an Incoming Call During an Intercom Call Advanced Intercom FeaturesUsing Intercom with External Telephone Calls Receiving an Intercom CallTransferring External Call to Other Handsets or Base Three-Way callingReceiving CID Records Caller ID CIDCall Waiting Caller ID Dialing a Caller ID Number Storing CID Records In CID MemoryReviewing Call Records Number of digits Explanation Example Storing CID Records in Internal MemoryStoring a Name and Number in Memory MemoryDeleting CID Records Reviewing a Stored Number Storing the Last Number DialedInserting a Pause in the Dialing Sequence Dialing a Number from Memory Changing a Stored NumberDeleting Records Stored in Memory Transferring memory from the handset to the base Transferring MemoryChain Dialing from Memory Transferring memory from the base to a handsetMessage Playback Handset Messages IndicatorAnswering System Operation Screening Calls from the BaseTo erase one message at a time from the base Memory FullErasing Messages HandsetTo erase a message from the handset Remote AccessLeaving a Memo Belt Clip and Optional Headset Connecting the Belt ClipConnecting an Optional Headset to the Handset Battery Safety Precautions Changing the BatteryDisplay Messages Handset Sound SignalsTelephone Solutions Troubleshooting GuideCaller ID Solutions Battery Solutions Answering System Solutions Causes of Poor Reception General Product CareThomson Inc Manager, Consumer Relations Box Indianapolis, Warranty AssistanceFor how long after your purchase Limited WarrantyIf you purchased your product outside the USA Description Model no Accessory InformationIndex Handset Date/Time Number Redial Thomson Inc