Storing a Chain of Numbers
You can link together a dialing sequence of phone numbers in separate memory locations by combining them in a single memory location or have another memory location stored in one of the locations to be linked.
For example | Memory Location |
Local access number of long distance company. | 6 |
Authorization code (ID). | 7 |
Where entire sequence is to be stored | 8 |
including long distance phone number. |
|
Storing
1.Press STORE.
2.Press memory location 6.
3.Press REDIAL/pause.
4.Press memory location 7.
5.Press REDIAL/pause.
6.Enter long distance number.
7.Press STORE.
8.Press location 8, where the entire location is to be stored.
9.Write the name for this location on the memory index card.
NOTE: When a chain number is stored in a memory location, it cannot be stored as another chain number sequence in a separate memory location.
Storing a Pause
The REDIAL/pause button has dual functionality and becomes a PAUSE when the STORE button is pressed first. It is valid only when storing a number into memory locations.
Use the REDIAL/pause button to insert a pause when a delay is needed in the dialing sequence (for example, when you must dial a 9 to get an outside line or when
you must enter codes to access your bank’s information line). The pause time is 4 seconds, if you need an additional 4 seconds, press the REDIAL/pause button again when storing the pause into a memory location. P shows in the display.
19