GE 29484 2-Line, 16017970 manual Introduction Before You Begin, Important Installation Information

Introduction

CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference.

Before You Begin

Parts Checklist

Make sure your package includes the following items:

1	2	3
4	5	6
7	8	9
*	0	#

One 4-wire	AC power	Desktop/wall	Handset Handset	Base
line cord	adaptor	mounting pedestal	cord

Telephone Jack Requirements

Wall plate

To properly connect your phone to your telephone lines, you should	Modular
identify the type of wall jack(s) you have. You will need an RJ11C (for
a single line) or an RJ14C (for two lines) type modular phone jack,	telephone
	line jack
which might look like the one pictured here, installed in your home.

If you don’t have either modular jack, call your local phone company to find out how to get one installed.

Important Installation Information

•Never install telephone wiring during a lightning storm.

•Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

•Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface.

•Use caution when installing or modifying telephone lines.

•Temporarily disconnect any equipment connected to the phone such as faxes, other phones, or modems.