CORDLESS PHONE SOLUTIONS (CONTINUED)
Problem | Solution | |
Unit beeps | • Place handset in base for 20 seconds; if it still beeps, | |
| charge battery for 12 hours. | |
| • Clean charging contacts on handset and base with a soft | |
| cloth, or an eraser. | |
| • See solutions for “No dial tone.” | |
| • Replace battery. | |
|
| |
Memory Dialing | • Did you program the memory location keys | |
doesn't work | correctly? | |
| • Did you follow proper dialing sequence? | |
|
|
|
CALLER ID |
|
|
|
| |
Problem | Solution | |
|
|
|
No Display | • | Is battery fully charged? Try replacing the battery. |
| • | Make sure that the unit is connected to a |
|
| electrical outlet. Disconnect the unit from the plug and |
|
| plug it in again. |
| • | Did you order Caller ID service from your local telephone |
|
| company? The display won't work unless you order Caller |
|
| ID service from your phone company. |
|
|
|
Caller ID Error Message | • | The unit displays this message if it detects anything other |
|
| than valid Caller ID information during the silent period |
|
| after the first ring. This message indicates either the |
|
| presence of noises on the line, or that an invalid message |
|
| has been sent from the telephone company. |
|
|
|
40