GE 15433020 manual Wall Mount Installation

WALL MOUNT INSTALLATION

Because it is necessary to charge the handset for 12 hours prior to connecting the phone for use the first time, it is better to leave the unit on a flat surface during initial charge before attempting to hang it on the wall.

1.Make sure the mounting bracket is securely fastened.

2.Set the TONE/PULSE switch to TONE for touch-tone service, or PULSE for rotary service. If you don’t know which type of service you have, check with the phone company.

3.Set RINGER switch to ON.

4.Place the handset in the base.

5.Connect the power supply cord into the base and the other end into an AC outlet. The CHARGE indicator comes on, indicating the battery is charging.

Allow the phone to charge for 12 hours before using the first time. If you don't charge the phone properly when you first set up the phone, performance of the battery will be compromised.

(Installation continued on the following page.)

1

5

				2
					CORDLESS TELEPHONE
				900 MHz DIGITAL ANSWERER
				DAY/	PAGE
				CHECK
				HOUR	MIN
		TALK	4	MESSAGES
				8.8.
				CHARGE/
	1	2	3
	4	5	6	ANNOUNCE	MEMO
3	7 8		9	AY/ ST	OP
				NEXT PL
				R EVIEW	SKIP
	*	0	#
				ERASE	ANSWER
					ON/OFF

CAUTION: Use only the Thomson 5-2472(black)/5-2471(white) power supply that came with this unit. Using other power supplies may damage the unit.

7