6.Remove the mounting bracket. Rotate it so that the bottom of the phone is flat.
Reattach the wall mount bracket by | 10 |
inserting the tabs into the slots on the top of the unit first, and then snapping the bottom tabs into place.
7.Plug the short telephone line cord into the jack marked TEL LINE on the back of the unit and plug the other end into a modular wall jack.
8.Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)
9.Remove the handset hook; turn it upside down, and put it back in the slot. You need to do this so the handset doesn’t fall out of the base.
10.Raise the base antenna.
9 8
7
6
8