CALLER ID
TIPS
If you answer a call before the Caller ID message is received (Example: before the second ring), the Caller ID message will not appear.
When a call is received via a telephone company that does not offer Caller ID service, the caller´s phone number and name do not appear. (This includes some international calls.)
When the call is via a private branch exchange (PBX), the caller´s phone number and name may not appear.
28
YOU MUST SUBSCRIBE TO CALLER ID SERVICE TO USE THIS FEATURE.
When the telephone rings, the Caller ID feature allows you to view the caller’s name and phone number on the display before you answer the phone. Additionally, you can dial the displayed number and store the information for memory dialing.
Make sure you have turned on the Caller ID/Call Waiting feature. (See page 4.)
Important:
The total memory locations for Caller ID messages and Phonebook locations (including Speed Dials) is 100 in total. When the memory locations (Phonebook and Caller ID) is 100, new Caller ID messages will overwrite the oldest Caller ID messages.
If any of the following occurs during Caller ID, operation will be canceled.
•Press END. The phone will return to the standby mode (or the call will be disconnected).
•Press TALK/FLASH or DELETE.
•Place remote in base.
•Receiving an incoming call or page (from the standby mode only).
•Receive a CIDCW (Caller ID on Call Waiting) (during a call only).
The idle time is 30 seconds. If the remote remains idle for 30 seconds, the phone will return to the standby mode (or back to the call).
1)When the Caller ID message is received, the display shows the caller’s phone number along with the date and time. The incoming call information is stored in the Caller ID record. If the Caller ID service includes the caller’s name, the name will appear on the display. (up to 15 characters.)
TIP
The headset LED will continue flashing during Talk Mode.
CALLER ID
29