Plantronics CT12, CT11 manual Installing the Beltclip, OUT of Range Warning, LOW Battery Warning

Page 20

TIP

You can charge the remote with or without the beltclip.

38

INSTALLING THE BELTCLIP

TO ATTACH THE BELTCLIP

Insert the beltclip into the holes on each side of the remote. Press down.

TO REMOVE

THE BELTCLIP

Pull one side of the beltclip to release the tab from the hole.

NOTE ON POWER SOURCES

OUT OF RANGE WARNING

If you walk away from the base unit you will eventually exceed the maximum operating range for the CT12 cordless headset system. Any active call will be suspended and a double beep will sound in your headset every 10 seconds to warn you that you are out of range. The double beep will cease once you return within range and any active call will be taken off mute allowing you to resume your conversation.

LOW BATTERY WARNING

When the headset is running low (approx. 5 minutes talk time remaining), an audible warning will be heard through the headset as a single beep repeating every 10 seconds. Soon after hearing this warning, you should recharge the remote pack.

TIP

It is strongly advised that you avoid walking out of range when on an active call as you may find the call takes some time to re- establish after returning into range.

MORE

39

Page 19 Page 21
Image 20
Page 19 Page 21
Contents CT11/12 Basics TIPTo change your Caller ID options Entering Your Area CodeMaking and Receiving Calls Ringer Tone Setting Remote On Base Remote Off BaseRedialing from Talk Mode Ringer Volume Setup Redialing a CallRedialing from Standby Mode Distinctive Ringer Setup Adjusting the Headset Volume Mute MicrophoneDuring a telephone call press and hold Off the microphone, and Mute appears on the displayTone Dialing SWITCH-OVER Selecting a Different Channel Find RemoteTraveling OUT-OF-RANGE Some telephoneUsing the Phonebook Flash and Call WaitingMessage LED Message waiting LED on2ND Line Press the number keypad Or to search Using the PhonebookPhonebook Phonebook Storage Process Storing NamesStoring Phone Numbers Distinctive RingsViewing the Phonebook Press /tSPEED. If you press TSPEED duringMaking Calls Using the Phonebook From Standby ModeFrom Talk Mode Speed DialingChain Dialing Deleting the Stored DataONE Touch Dialing for ONE Number Storing the ONE Touch DialMaking Calls with ONE Touch Dial Deleting the ONE Touch DialCaller ID Place remote in baseCaller ID Displays Viewing the Caller ID List Deleting Information Using the Caller ID Message List From the Caller ID ListCall Waiting Deluxe Features More Changing the Digital Security CodeOUT of Range Warning Installing the BeltclipLOW Battery Warning Maintenance General InformationTroubleshooting Symptom SuggestionParts & Accessories DescriptionBattery pack IndexEncinal345 EncinalStreetStreet
Top Page Image Contents