Plantronics CT11, CT12 manual To change your Caller ID options, Entering Your Area Code

TIP

Standby Mode: The remote is not in use, is off the base, and

TALK/FLASH has not been pressed. A dial tone is not present.

4

AREA CODE allows you to enter your local area code so CID will not show the area code from local callers. See the next page for area code instructions.

To change your Caller ID options:

1) When the phone is in the standby mode, press MENU/MUTE.

2) Press ▲ or ▼ to move the pointer to “Caller ID

Setup”, then press SELECT/CH.

3) Press ▲ or ▼ to choose “Auto Talk” or “CIDCW”,

then press SELECT/CH.

4) Press ▲ or ▼ to change the selection.

AutoTalk: “Auto Talk

On” or “Auto Talk

Off”

CIDCW: “CIDCW

On”, “CW Deluxe

On” or “CIDCW Off”

5)Press SELECT/CH, and you will hear a confirmation tone.

6)Press END to exit.

ENTERING YOUR AREA CODE

If you enter a 3-digit area code number in the “Area Code” option, your local area code does not appear in Caller ID messages. For calls received from outside your local area code, you will see a full 10-digit number.

1) When the phone is in the standby mode, press MENU/MUTE.

2) Press ▲ or ▼ to move the pointer to “Caller ID Setup”, then press SELECT/CH.

3) Press ▲ or ▼ to move the pointer to “Area Code”, then press SELECT/CH.

4) Use the number keypad (0 to 9) to enter a 3-digit area code.

5)Press SELECT/CH, and you will hear a confirmation tone.

6)Press END to exit.

TIP	B
area requires	ASICS
If your calling

10-digit dialing, do not program this option.

TIP

If the area code has already been stored in memory, the stored area code will be displayed in this mode. To change it, press delete and the number keypad to enter the new area code.

5