Mitel 5624 manual Alarm Operation, Push-button Alarm, Acoustic Location Signal, Test Alarm

Page 41

Alarm Operation

Alarm Operation

Note: The following system dependent features apply to the 5624 Personal Alarm license only. See the Mitel 5624 Wireless Handset Configuration Guide.

Push-button Alarm

You press the red alarm button twice within two seconds to activate the alarm. By default the text “Personal Alarm” appears. The alarm is sent to the alarm centre that distributes it further. After that the handset returns to stand-by mode. Note that you can always trigger the alarm when you are speaking, editing your settings, or while the handset is locked.

Acoustic Location Signal

An alarm can be followed by an Acoustic Location Signal (ALS). The ALS is a signal from the handset that sounds for a predefined period of time. You silence the signal by pressing the Mute button on the handset.

Test Alarm

If you press and hold the red alarm button until the (default) “Test Alarm” text appears the following occurs depending on the options specified:

•A beep is heard.

•The orange LED flashes twice.

•The vibrator stirs.

•The handset receives a notification that the alarm has been received by the system.

•If configured, the Acoustic Location Signal (ALS) is activated after the alarm has been sent, or a call is established to a pre-defined number.

If the parameter "Silent alarm" is set, ALS will not be triggered and you will not be notified that the alarm was sent.

•information about the handset’s location is sent along with the alarm.

Alarm with Location Information

The 5624 handset is compatible with both the Cisco Mobility Services Engine (MSE) and the Ekahau Real Time Location System (RTLS), which provides a more accurate location than AP Location.

33

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Wireless Handset Trademarks Iii Mitel WiFi System Emea User Guide Alarm Operation Troubleshooting Operation Notice Vii Mitel WiFi System Emea User Guide Viii 5624 Handset About Your PhoneMulti-function button Elements of the HandsetFeatures and Functions Chargers Battery Pack ChargerDesktop Charger Rack ChargerTips for your Comfort and Safety Contacting Emergency ServicesFrequency Range Dont Cradle the HandsetHandset Exposure to Radio Frequency SignalsEnvironmental Requirements Chemical Resistance Icons and Text in the DisplayIcons Menu icons System dependent Keys and Buttons Alphanumeric Keys Volume ButtonHot Keys Multifunction ButtonText Input Mode HeadsetsStandby Mode and Number Input Mode Switch the Handset Off Switch the Handset OnCustomizing Your Phone Log a Shared Phone On/OffLock/Unlock the Keypad in Idle Mode Turn On/Off the Audible SignalLock/Unlock the Keypad Log On a HandsetLock/Unlock the Keypad during a Call Lock/Unlock the HandsetLock the Keypad Unlock KeypadCall List Making and Answering CallsMake a Call Pre-DialDial a Number from the Local Phonebook Dial the Sender of a MessageDial a Name from the Central Phonebook Dial a Number from the Company PhonebookDuring a Call Answer a CallAnswer a Call End a CallTurn on/off the Microphone during a Call Adjust the Volume during a CallOpen Contacts during a Call Unlock the Keypad Lock/Unlock the Keypad during a CallStart a New Call during a Conversation Hold Call HandlingTransfer to a New Call Unsupervised Supervised TransferConference Split ConferenceAnswer Call Waiting Call Park Messaging Incoming Message for the 5624 Services LicenseMessage List Receive a MessageDelete a Message Reply to a MessageForward a Message Call the Sender of the MessageWrite and Send a Message Call a Number Included in a MessageSave a Number Open a Sent Message Receive a Message with Request for AnswerSend a Message to Another Destination Accept/Reject the MessageMessage Queuing and Priority Message Queuing and Message PriorityInteractive Message Interactive MessagingSend Mobile Data Colored MessagingMobile Data Voice Mail One Key Voice Mail AccessSend Mobile Data with a Prefix Receive a Voice MailPush-button Alarm Alarm OperationAcoustic Location Signal Test AlarmAutomatic Call after Alarm Alarm with DataCustomizing the Menu Tree Menu TreeCalls Contacts Profile Messaging Administrator can configure PPT ServicesShort cuts Connections SettingsMenu Tree Additional In Call Functions CallConnections Menu HeadsetsNavigate the Menu Call List Calls MenuCharger Missed Calls Accept a PTT Invitation Voice Style Push to TalkPTT Voice Style Calls Handset initiated PTT Message Style System/Application initiated Reject a PTT Invitation Voice StyleAccept a PTT Invitation Message Style Reject a PTT Invitation Message StyleDefine Soft Keys Short Cuts MenuDefine Navigation Keys Define Hot KeysAdd a Service Services MenuDefine the Multifunction or Alarm1 Button Delete a Service Edit a ServiceInbox Reply to a SenderCall a Number in Text Forward a MessageCall a Sender Unsent Messages Write New MessagesSent Messages Delete/Delete AllAdd a new Profile Profiles MenuDelete a Profile Edit a ProfileCall a Contact Contacts MenuAdd a Contact Add a New ContactDelete a Contact Edit a ContactCentral Phonebook Add a Contact from the Call ListSound and Alert Settings Settings MenuSet Message Alerts for Mail Set the Battery Warning ToneTurn the Vibrator On/Off Set the Key SoundConfigure Handset for Hearing Aid Phone Lock SettingsActivate the Automatic Key Lock Activate the Phone LockChange the PIN Code Display SettingsScreen Saver BrightnessRotate Display Text Time and Date SettingsFont style Set the Time FormatAnswering Key AnsweringSet the Date Format Change the Menu Language Change Text Size for MessagesChange Owner ID Answering BehaviorOperational Problems TroubleshootingError or Warning Messages TroubleshootingSee the Mitel 5624 Wireless Handset Configuration Guide LED Error IndicationsOperation Notice Accessibility and Voice QualityOperating Area Out of RangeMaintenance of Batteries MaintenanceBefore Starting the Easy Replacement Procedure Easy Replacement of HandsetEasy Replacement using the 5624 Programmer Easy Replacement ProcedureLED indication Description LED Indications during Easy ReplacementAttach the Swivel-type Clip Attach the Hinge-type ClipRelated Documents Attach a Cover without a ClipWireless Handset User Guide Numerics Index
Related manuals
Manual 95 pages 9.13 Kb Manual 86 pages 4.73 Kb

5624 specifications

The Mitel 5624 is an advanced IP phone designed for professional environments, providing users with a blend of functionality, flexibility, and easy-to-use features. As part of Mitel’s extensive lineup of communication solutions, the 5624 is tailored for both small and medium businesses as well as larger enterprises. It boasts high-quality audio and a user-friendly interface, making it a popular choice among professionals.

One of the standout features of the Mitel 5624 is its support for dual-mode operation, enabling it to function effectively both as a desktop phone and as a mobile device via Wi-Fi connectivity. This versatility means that employees can remain connected regardless of their physical location within an office setting. The phone is equipped with a large, backlit LCD display that provides easy navigation through the menu and access to various features.

The Mitel 5624 also features a range of programmable keys, allowing users to personalize their setups according to their specific needs. These programmable buttons can be set up for quick access to frequently dialed numbers, features like hold and transfer, or even for managing multiple lines.

With respect to audio quality, the Mitel 5624 offers HD voice technology, which enhances clarity during conversations, reducing background noise and improving overall sound quality. This ensures that users can engage in clear and uninterrupted discussions, an essential aspect for productivity in any professional atmosphere.

Security is another crucial aspect of the Mitel 5624, which supports industry-standard encryption protocols. This ensures that data transmission remains secure, safeguarding sensitive information and maintaining privacy during calls.

In terms of connectivity, the Mitel 5624 offers a variety of options, including wired Ethernet and the ability to connect through Wi-Fi. This flexibility allows organizations to tailor their network setups according to their existing infrastructure.

The phone is designed with user comfort in mind, featuring an ergonomic design, adjustable stand, and a headset port for those who prefer hands-free communication. Coupled with its robust build quality, the Mitel 5624 is suited for heavy usage in both office settings and on-the-go scenarios.

In conclusion, the Mitel 5624 IP phone is a versatile and powerful tool that enhances communication within businesses. Its combination of advanced technologies, user-friendly features, and a focus on security makes it an ideal choice for modern professional environments. Whether used for traditional desk work or mobile communication, the Mitel 5624 stands out as a reliable and efficient solution for all communication needs.
Top Page Image Contents