Getting started with
Turning on the headset
•Press the power button on the headset to turn it on.
•The headset will wirelessly connect with the wireless base station.
•You will see the three LEDs on the wireless base station turn on, blink briefly, and then one of the LEDs will turn solid.
Power button
Logitech® Wireless Headset F540
Using the volume rollers and microphone mute button
•Use the two rollers on the left ear cup to independently control the volume of the game and voice chat audio.
•You can mute your microphone by pressing the microphone mute button, or by rotating the microphone boom all the way closed (up).
•When your microphone is muted, an LED located at the tip of the microphone will illuminate red.
Input selector
Chat volume roller
Microphone mute button
Turning off the headset
•Press and hold the power button for approximately one second.
Sound volume roller
Using the input selector button
•If you have multiple audio devices connected to the wireless base station, you can press the INPUT button on the headset to toggle through them.
•Press the button to change the audio source. On the front of the wireless base station, the next LED will illuminate, representing the active audio source. (If there is only one audio device connected to the back of the wireless base station, that input will remain active).
Wireless base station LEDs
•When powering off the headset, the LEDs on the wireless base station will blink briefly and then turn off.
Power button
18 English |
|
| English 19 |