Siemens SIMATIC PCS 7 brochure Monitoring and diagnostics

Overview device functions

Motor contactor with RLT

SIRIUS compact starter and infeed system for 3RA6

SIRIUS motor starter M200D

–innovative solution for dis- tributed drive technology

3RW44 soft starter

SIMOCODE pro 3UF7

© Siemens AG 2011

■Tried and tested SIRIUS technology

■3 sizes S6, S10, S12 (55 to 250 kW at 400 V)

■Can be used up to 60 °C without derating

■Long electrical service life

■Replaceable main current contacts

■LED display of the remaining life time of the main current contacts (60%, 40%, 20%)

■With 20% or less remaining life time, a message is sent via AS-Interface

■Connection via AS-Interface

■Compact starter up to 32 A as direct and reversing starter, 45/90 mm wide

■Only one weld-free clearance, instead of circuit breaker, contactor, and overload relay

■Electronic trigger with wide setting range 1:4 (5 versions)

■Integrated overload function with differentiated fault message

■Infeed system up to 70 mm² and 100 A

■Connection via AS-Interface

■Degree of protection IP65 allows application-oriented setup without a control cabinet

■Protects, switches, and monitors the motor and application

■Parameterization via STEP 7 HW Config

■Connection to AS-i, PROFIBUS, and PROFINET

■Little variance for all motor starter versions

■Manual operation and main switch are integrated

■Electronically controlled start-up and coasting of asynchro- nous motors

■Integrated jumper contact system

■Integrated motor overload intrinsic device protection

■Adjustable current limiting

■Integrated status and fault monitoring

■Torque control

■Integrated braking function (superimposed DC braking)

■Compact design

■5 sizes for the power range from 15 to 710 kW

■Recording the active power

■Connection via PROFIBUS

■Intelligent connection of distributed drives to the control level

■Autonomous function without PLC or bus

■Comprehensive monitoring functionality

■Graphical parameterization

■Analog inputs/outputs for application monitoring

■Integrated inputs/outputs for motor and application monito- ring

■Can be used for all motor applications

■Flexible motor management system with integrated protec- tion, control and monitoring functions

■Intelligent pre-processing is possible

■Modularly expandable system

■Outputs for activating motor contactors

■Connection via PROFIBUS

■can also be used for safety functions (locally or via PROFIsafe)

24Monitoring and diagnostics