Talkswitch manual Setting UP Your TS-600 Phone, Configure Area Codes

G O O D BY E

M E N U

T S - 6 0 0 U S E R G U I D E

SETTING UP YOUR TS-600 PHONE

1. Press the button to configure the phone.

The menu screen will be displayed.

2.You can use the S button or the T button to move the selection indicator up or down, and press the D I A L / E N T E R button to select an option. Alternatively, you can just press a digit to select the corresponding option.

MENU

Use S/T Enter To Select 1 = Enter area codes

2 = Enter access code

3 = Select ring tone

4 = Select flash duration

3. If you made a mistake during telephone set up procedures, press the button. Set up procedure is terminated and the idle state screen

will be displayed.

CONFIGURE AREA CODES

If you enter your local area codes, Caller ID number can be dialed correctly in North America. If you dial your local calls using 7 digits (e.g., 555-1212), you need to enter your area code for 7-digit dialing. Otherwise, enter up to 3 area codes for 10-digit local dialing. To enter area codes:

1. Press the M E N U button followed by 1 .

MENU

Use S/T Enter To Select

1 = 7-digit dialing

2 = 10-digit dialing

2.If you dial your local calls using 7 digits (e.g., 555-1212), then press enter your local area code.

3.If you dial your local calls using 10 digits (e.g., 303-555-1212), press enter up to 3 area codes for 10-digit dialing.

1to

2to

4.If you use this phone in an area where the caller’s number can be dialed without modification, do not enter any area code. Caller’s number will be dialed as it is received. If you enter an area code by mistake, use the W button to delete an area code.

5.If you enter any area code, caller’s number will be displayed with the North American format (613-725-2980). If you don’t enter any area code, caller’s number will be displayed as it is received (6137252980).

W W W.T A L K S W I T C H . C O M 5