Siemens NI-1200 specifications 1275·00030

Page 19

'ssue 5, June 1999

•Keypad (Compose Number)/Menu and Dialog Keys/Speaker

Dial the phone number using the keypad, and then press the f/ dialog key. The speaker and microphone are activated, but dial tone is not heard because dialing has already begun. The Optiset terminal selects a primary line call appearance for the call and initiates a call origination.

•Keypad (Compose Number)/Offhook

Dial the phone number using the keypad, and then lift the handset. The speaker and microphone are activated, but dial tone is not heard because dialing has already begun. The Optiset terminal selects a primary line call appearance for the call and initiates a call origination.

•Redial (Menu and Dialog Keys)

Use the dialog keys to find and select the Redial aptian from the menu system. The terminal displays the last number dialed and asks you if an origination attempt to that number is desired. Press the f/ dialog key to send the number to the switching system for call origination. Dial tone is not heard. The Optiset terminal selects a primary line call appearance for the call.

•Redial Key

Press the Redial key. The terminal displays the last number dialed and sends that number to the sWitching system for call origination. Dial tone is not heard. The Optiset terminal selects a primary line call appearance for the call.

•Speed Dial Key

Press the Speed Dial key for the party you are calling. The terminal displays the phone number for that party and sends the number to the switching system for call origination. Dial tone is not heard. The Optiset terminal selects a primary line call appearance for the call.

26

1275·00030

Issue 5, June 1999

Originate a Call (With Another Call Active)

•Une Key (Handset or Speaker)/Keypad

With a call already active, press a line key to originate another call. The Optiset terminal places the active call on hold and originates a new call to the selected line appearance. Use the keypad to dial the phone number for the new call.

•Hold (Key or Menu and Dialog Keys)/Make Another Call (Menu and Dialog Keys)/Handset or Speaker

With an active call on hold, use the dialog keys to select the Make Another Call option from the menu system. The Optiset terminal selects a primary line call appearance for the new call. Dial tone is heard. Use the keypad to dial the phone number for the new call; use the handset or the microphone and speaker to carry on your conversation.

•Consultation Call (Menu and Dialog Keys)

With an active call in progress, originate a consultation call by selecting the Consultation Call option from the menu system. The Optiset terminal places the existing call on hold, selects a prime line call appearance for the new call, and sends an origination message to the switching system. Dial tone is heard. Use the keypad to dial the phone number for the consultation call.

•Conference (Key or Menu and Dialog Keys) (No Calls On Hold)

While an active call is in progress (and no other calls are on hold), originate a conference by selecting the Conference option from the menu system or by pressing the Conference key. The Optiset terminal marks the current call for conference and places it on hold, selects a primary line call appearance for the new call, and sends an origination message to the switching system. Dial tone is heard. Use the keypad to dial the phone number of the conferee. When the new call is answered, use the menu system or the Conference key to retrieve the original party from hold.

1275·00030

27

Page 18 Page 20
Image 19
Page 18 Page 20
Contents OPTISET@ NI-1200 Issue Date Issued Issue InformationContents Summary of Issue EnhancementsAlternative Call Operations Menu Trees LJ~UJ Introducing Your OptisetProgramming Requirements Switching System National Isdn Compliance IssuesIssue 6, June Microphone Volume UpNolume Down KeysOptional Headset Multiline Hunt Group Types of Service SupportedBasic Electronic Key Telephone Service Baaic Isdn Terminal1275-00030 Basic Call Operations Place a Call Using the Handset Procedure DisplayIDial 1555-5555 THU FEB 04, 99 0943 AM 555-5555 01 00Ithu FEB 04, 99 0943 ~~ 555-5555 010000Retrieve call line 1? 555-5555Answer call? 1I0ld?555-5555 010012 555-55!J5 Ilold?5SS-SS55 01 00 Hold?555-5555 010522 Cancel Conference? 555-5565Ringing Ringing IconferenceIDrop last party? Cancel Conference?Conference? Alternative Call Operations 1275·00030 1275·00030 Illue 5, June Hold a Call Clear a CaliOn Hold88U8 5, June Transfer a Call Ssue 5, June Password Prompt USER-CONTROLLED Terminal SettingsAssign, Change, or Delete Password Enter passwordPhone configuration Menu Verify new passwordPhone configuration Password?Audio settings Ringer pitch? Configure phone?Initial settings? Audio settings?Speaker Loudness Audio settings Handset loudness?Key clicks Orf Turn on key clicks? Audio settings Speaker loudness?Audio settings Ringer loudness? Key click setting? THU FEB 04, 99 0955 AMMuted ring selected Select attention tone? Audio settings Busy alerting type?Busy Alerting Type Procedure Display 1i ck Sett i ng?THU FEB 04 0955 AM Local featuresMenu overlay delay?O Local Features?Line preview mode Change to line hold? Loca I features Speaker control?Speaker is enabled Oisable speaker? Line hold mode Change to line preview?Menu Setting ProcedureDisplay Mellll is demand Dilly Disable menu mode?Menu Is disabled Activate menu mode? Loca I features Menu setting?Hot Keypad ProcedureDisplay Phone configuration menu 1 ­ Initial settings?Hot keypad mode Select composed dial? Composed dial mode I Activate menu mode?Speaker Double talk Double talk? Loca I features Hot keypad setting1Loca I features Speaker setting? Speaker single Talk Single talk? Loca I features0 to 9 seconds Enter call display time Loca 1 features Incoming call disp?Incoming Call Display ProcedureDisplay Off Hook Result Procedure DisplayLocal features Menu overlay delay? Fast transfer? Loca features Off hook result?Phone configuration menu Initial settings? Local features? Loca I features Off hook result?Use the .J and I dialog Local features Fast transfer?Press the II dialog key to select the local Features menu Use a combination of the .JTo change the Fast Transfer Local features Autoanswer mute?Press the t/ dialog key to select the Local Features menu THU fEB 64, 99 6955 AMMo 05 Day 22 Year Set date?Mo XX Day XX Year Enter DateOptiset Terminal Used AS AN Ekts Phone 1275·00030 1275-00030 Hold ConferencelTransfer Call AppearanceIntercom Headset Operation Controlling the Headset Using the PlugPlugging Headset Controlling the Headset Using Keys or Menu Options Features Conference/Large Conference 1275·00030 Download Active Call Inspection Local Feature InspectionSystem Feature nspection Idle Line InspectionMake Busy Line Status/Speed DialMute 188ue 5, June 100 1275-00030 UUS Answering Redial Menu TreesOutgoing Call· Dialing Incoming Call AlertingAuto Callback Call Alerting Outgoing Call OffhookRelease this call? Retrieve line x? Transfer call? Clear download message? Call Log AccessedIndex CACH,9 Ssue 5, JuneMenu Trees TA-TAPI Issue 5, June

NI-1200 specifications

The Siemens NI-1200 is a versatile and innovative device designed for a wide range of automation and control applications. As part of Siemens' extensive portfolio, the NI-1200 showcases cutting-edge technologies and features that enhance operational efficiency and flexibility in industrial environments.

One of the main features of the NI-1200 is its robust processing power. With a high-performance processor, the device is capable of handling complex automation tasks in real-time. This enables seamless integration with various automation components, allowing for greater control and monitoring of processes.

The NI-1200 is equipped with advanced communication capabilities, supporting various industrial communication protocols such as Ethernet/IP, Profinet, and Modbus. This extensive connectivity makes it easy for the device to interface with other systems, sensors, and actuators, promoting interoperability and data exchange across different platforms.

In terms of data handling, the NI-1200 offers rich data logging and analysis features. Users can collect, store, and analyze data from different sources, which is essential for process optimization and troubleshooting. This capability ensures that organizations can make informed decisions based on accurate and timely data, ultimately leading to improved productivity and reduced downtime.

The device is also designed with scalability in mind. Whether organizations are looking to implement a small-scale solution or require extensive systems integration, the NI-1200 can adapt to changing needs. Its modular design allows for easy upgrades and expansions, catering to future growth and evolving technology landscapes.

Another key characteristic of the Siemens NI-1200 is its user-friendly interface. The device features an intuitive graphical user interface (GUI) that simplifies configuration and monitoring tasks. This ease of use reduces the learning curve for operators and maintenance personnel, enhancing overall productivity.

Additionally, the NI-1200 is built with durability and reliability in mind, suitable for harsh industrial environments. It complies with international standards for safety and environmental conditions, making it a dependable choice for various applications, including manufacturing, process control, and building automation.

In summary, the Siemens NI-1200 is a powerful and feature-rich automation device that stands out for its processing capabilities, communication options, scalability, and user-friendly interface. Its combination of advanced technologies and robust characteristics makes it an ideal solution for organizations looking to enhance their automation and control processes. With the Siemens NI-1200, businesses can achieve greater efficiency, flexibility, and reliability in their operations.
Top Page Image Contents