Siemens NI-1200 specifications Transfer a Call

Page 24

Issue 5, June 1999

not been completed, or select the Release This Call oplion if ringback tone has begun. The new call attempt is released, and the held call is retrieved.

•Cancel Transfer (Menu and Dialog Keys)/Release This Call (Menu and Dialog Keys)

Abandoning an attempt to transfer a call results in the original party, now on hold, being retrieved. Select the Cancel Transfer option from the menu system if dialing has not been completed, or select the Release This Call option if ringback tone has begun. The new call attempt is released, and the held call is retrieved.

Transfer a Call

•Transfer (Key or Menu and Dialog Keys)

Transfer an active call by either selecting the Transfer option from the menu system or pressing the Transfer key. The Optiset terminal marks the current call for transfer and places it on hold, sends a Transfer FA message to the switching system, receives the Transfer FI message back from the switching system. and either selects a line or prompts you 10 Select a Line for the transfer. When dial tone is heard, dial the phone number of the party to whom the original call is to be transferred. The terminal connects the held call to the active call and drops your connection.

•Preview While A Call Is On Hold (Key)/Line Key (Associated with the Held Call)/Transfer (Key Only)

Transfer a call on hold by first pressing the Preview key to enter the Preview mode. Then press the Line key associated with the held call. Finally, press the Transfer key. The Opliset terminal marks the held call for transfer. sends a Transfer FA message to the switching system, and receives the Transfer FI message back from the switching system. When dial tone is heard, dial the phone number of the party to whom the held call is to be transferred. The terminal connects the held call to the active call and drops your connection.

36

1275·00030

Issue 5, June 1999

•Conference (Key)/Transfer On Disconnect (Subscribed Feature)

If you are subscribed to a Transfer-On-Disconnect feature provided by the switching system that serves your Optiset terminal, establish a conference call with the party to whom you intend to transfer the original call. Then disconnect from the call. The Transfer-On-Disconnect fealure maintains the connection between the other two parties and drops your connection.

Note: The Transfer feature is a combined local/switch-based feature, the operation of which depends on the degree of compliance of the connected switching system with National ISDN standards. For a discussion of this issue and suggested alternative Transfer procedures, refer to "Switching System National ISDN Compliance Issues" in Chapter 1. INTRODUCING YOUR OPTISET TERMINAL.

Set Up Conference Call

•Origination (Handset Off-hook or Speaker Key)/Conference (Key)/Dial Two Successive DNs/Conference (Key or Menu and Dialog Keys)

With the Optiset terminal idle, lift the handset or press the Speaker key. Then, for a small conference, press Ihe Conference key; for a large conference, press the Large Conference key first and then the Conference key. At the sound of dial tone, dial the first phone number.

When the switching system has accepted the first phone number, the Optiset terminal automatically places that call on hold and selects a line or prompts you to Select a Line for the second call origination. After selection of the second line, dial the second phone number. After the second call is accepted by the switching system, select the Complete Conference option from the menu system or press the Conference key. The Optiset terminal retrieves the first call from hold and merges the second call into the conference.

1275-00030

37

Page 23 Page 25
Image 24
Page 23 Page 25
Contents OPTISET@ NI-1200 Issue Information Issue Date IssuedSummary of Issue Enhancements ContentsAlternative Call Operations Menu Trees Introducing Your Optiset LJ~UJSwitching System National Isdn Compliance Issues Programming RequirementsIssue 6, June Volume UpNolume Down Keys MicrophoneOptional Headset Types of Service Supported Basic Electronic Key Telephone ServiceBaaic Isdn Terminal Multiline Hunt Group1275-00030 Place a Call Using the Handset Procedure Display Basic Call OperationsIDial 1555-5555 555-5555 01 00 Ithu FEB 04, 99 0943 ~~555-5555 010000 THU FEB 04, 99 0943 AM555-5555 Answer call?1I0ld? Retrieve call line 1?555-55!J5 Ilold? 5SS-SS55 01 00Hold? 555-5555 010012Cancel Conference? 555-5565 RingingRinging IconferenceI 555-5555 010522Cancel Conference? Drop last party?Conference? Alternative Call Operations 1275·00030 1275·00030 Illue 5, June Clear a CaliOn Hold Hold a Call88U8 5, June Transfer a Call Ssue 5, June USER-CONTROLLED Terminal Settings Password PromptEnter password Assign, Change, or Delete PasswordVerify new password Phone configurationPassword? Phone configuration MenuConfigure phone? Initial settings?Audio settings? Audio settings Ringer pitch?Audio settings Handset loudness? Speaker LoudnessAudio settings Speaker loudness? Audio settings Ringer loudness? Key click setting?THU FEB 04, 99 0955 AM Key clicks Orf Turn on key clicks?Audio settings Busy alerting type? Busy Alerting Type Procedure Display1i ck Sett i ng? Muted ring selected Select attention tone?Local features Menu overlay delay?OLocal Features? THU FEB 04 0955 AMLoca I features Speaker control? Speaker is enabled Oisable speaker?Line hold mode Change to line preview? Line preview mode Change to line hold?Mellll is demand Dilly Disable menu mode? Menu Is disabled Activate menu mode?Loca I features Menu setting? Menu Setting ProcedureDisplayPhone configuration menu 1 ­ Initial settings? Hot keypad mode Select composed dial?Composed dial mode I Activate menu mode? Hot Keypad ProcedureDisplayLoca I features Hot keypad setting1 Loca I features Speaker setting?Speaker single Talk Single talk? Loca I features Speaker Double talk Double talk?Loca 1 features Incoming call disp? Incoming Call Display ProcedureDisplayOff Hook Result Procedure Display 0 to 9 seconds Enter call display timeLoca features Off hook result? Phone configuration menu Initial settings? Local features?Loca I features Off hook result? Local features Menu overlay delay? Fast transfer?Local features Fast transfer? Press the II dialog key to select the local Features menuUse a combination of the .J Use the .J and I dialogLocal features Autoanswer mute? Press the t/ dialog key to select the Local Features menuTHU fEB 64, 99 6955 AM To change the Fast TransferSet date? Mo XX Day XX YearEnter Date Mo 05 Day 22 YearOptiset Terminal Used AS AN Ekts Phone 1275·00030 1275-00030 ConferencelTransfer Call Appearance HoldIntercom Controlling the Headset Using the Plug Headset OperationPlugging Headset Controlling the Headset Using Keys or Menu Options Features Conference/Large Conference 1275·00030 Download Local Feature Inspection System Feature nspectionIdle Line Inspection Active Call InspectionLine Status/Speed Dial Make BusyMute 188ue 5, June 100 1275-00030 UUS Answering Menu Trees RedialIncoming Call Alerting Auto Callback Call AlertingOutgoing Call Offhook Outgoing Call· DialingClear download message? Call Log Accessed Release this call? Retrieve line x? Transfer call?Index Ssue 5, June CACH,9Menu Trees Issue 5, June TA-TAPI

NI-1200 specifications

The Siemens NI-1200 is a versatile and innovative device designed for a wide range of automation and control applications. As part of Siemens' extensive portfolio, the NI-1200 showcases cutting-edge technologies and features that enhance operational efficiency and flexibility in industrial environments.

One of the main features of the NI-1200 is its robust processing power. With a high-performance processor, the device is capable of handling complex automation tasks in real-time. This enables seamless integration with various automation components, allowing for greater control and monitoring of processes.

The NI-1200 is equipped with advanced communication capabilities, supporting various industrial communication protocols such as Ethernet/IP, Profinet, and Modbus. This extensive connectivity makes it easy for the device to interface with other systems, sensors, and actuators, promoting interoperability and data exchange across different platforms.

In terms of data handling, the NI-1200 offers rich data logging and analysis features. Users can collect, store, and analyze data from different sources, which is essential for process optimization and troubleshooting. This capability ensures that organizations can make informed decisions based on accurate and timely data, ultimately leading to improved productivity and reduced downtime.

The device is also designed with scalability in mind. Whether organizations are looking to implement a small-scale solution or require extensive systems integration, the NI-1200 can adapt to changing needs. Its modular design allows for easy upgrades and expansions, catering to future growth and evolving technology landscapes.

Another key characteristic of the Siemens NI-1200 is its user-friendly interface. The device features an intuitive graphical user interface (GUI) that simplifies configuration and monitoring tasks. This ease of use reduces the learning curve for operators and maintenance personnel, enhancing overall productivity.

Additionally, the NI-1200 is built with durability and reliability in mind, suitable for harsh industrial environments. It complies with international standards for safety and environmental conditions, making it a dependable choice for various applications, including manufacturing, process control, and building automation.

In summary, the Siemens NI-1200 is a powerful and feature-rich automation device that stands out for its processing capabilities, communication options, scalability, and user-friendly interface. Its combination of advanced technologies and robust characteristics makes it an ideal solution for organizations looking to enhance their automation and control processes. With the Siemens NI-1200, businesses can achieve greater efficiency, flexibility, and reliability in their operations.
Top Page Image Contents