Issue 5, June 1999
Time
From the idle menu display you can set the time that is displayed on your Optiset terminal by scrolling to the Set time? menu option. When this option is displayed, press the t/ dialog key to display the xx:xx field. Enter the current time in the format already displayed, and press * for AM or # for PM. Then press the t/ dialog key to store your entry. At any time prior to storing your entry you can abort the Time option and retain the previous settings by pressing the ~ dialog key.
Transfer
Transfer is a combined
It the Fast Transfer feature has been enabled on your Optiset terminal, you can simply hang up when the party to whom you are transferring the call answers. The call will transfer automatically to the party you called. It the Fast Transfer feature is not enabled, select the Complete transfer? option from the menu system to transfer the call.
The menu system provides a number of options at different stages of the transfer operation. While you are dialing the transfer number, you may select either the Cancel transfer? option or the Restart dialing? option. The Cancel Transfer option allows you to stop the transfer and retrieve the original call from hold. The Restart Dialing option cancels the transfer call and allows you redial, while the original call remains on hold. This option is helpful if you have dialed an incorrect digit or have begun to dial the wrong party.
After you have finished dialing the transfer number and have the new party on the line, you may select one of the following options:
100 |
|
Issue 5, June 1999
Complete transfer?, Release this call?, Retrieve tine x?, or Join line x? The Complete Transfer option transfers the held call to the new party. The Release This Call option disconnects from the transfer call and reconnects to the held party. The Retrieve line x option allows you to toggle between the new party and the held call. "line x" (1 to 44) is the tine key number associated with the held call. The Join line x option puts you in a conference call with both other parties. "line x" (1 to 44) again is the line key number associated with the held call.
If your Optiset terminal has been subscribed to a
When a UUI message is available, the status light associated with the UUI Read feature key lights and "UUI" appears at the far right end of the first column of the display. Press the UUI Read feature key to read the UUI message for the incoming call. Then press the UUI Read feature key again to delete the message and extinguish the status light.
If mUltiple calls are present, each call may have its own UUI message available. You can use the Line Preview mode to select a specific line appearance and then press the UUI Read feature key to view the message for that call. Then press the UUI Read feature key again to delete the message and extinguish the status light. Select another line appearance and repeat the preceding steps if you want to read the messages for other calls.
If your Optiset terminal has been subscribed to a
1275·00030 | 101 |