ISlue 5, June 1999
appropriate feature keys, you can activate features that send prerecorded messages to other parties as follows:
•UUS Answering - sends a message to the calling party when you answer a call.
•UUS Originating - sends a message to the called party when you originate a call.
•UUS Terminating· sends a message to the called party when you terminate the call.
UUS Answering
While the UUS Answering feature is active, your terminal will send a prerecorded message to the calling party every time an incoming call is answered. Press the UUS Answering feature key to activate the feature. The associated status light will turn on to indicate that the feature is active. If your Optiset terminal is idle or active with a call, the prerecorded message will display for 5 seconds.
To deactivate the feature. press the UUS Answering feature key again. The associated status light will go dark.
Multiple UUS Answering feature keys can be programmed on your terminal, each with a separate message. If you have this configuration, press the appropriate feature key to select the message that will be sent to answered calls.
UUS Originating
While the UUS Originating feature is active, your terminal will send a prerecorded message to the called party every time you originate a call. Press the UUS Answering feature key to activate the feature. The associated status light will turn on to indicate that the feature is active. It your Optiset terminal is idle or active with a call, the prerecorded message will display for 5 seconds.
To deactivate the feature, press the UUS Originating feature key again. The associated status light will go dark.
Multiple UUS Originating feature keys can be programmed on your termina', each with a separate message. If you have this
102 | 1275·00030 |
Issue 5, June 1999
configuration. press the appropriate feature key to select the message that will be sent to originating calls.
UUS Terminating
While the UUS Terminating feature is active. your lerminal will send a prerecorded message to the calling party every time you terminate or reject a call. Press the UUS Terminating feature key to activate the feature. The associated status light will turn on to indicate that the feature is active. Ir your Optiset terminal is idle or active with a call. the prerecorded message will display for 5 seconds.
To deactivate the feature, press the UUS Terminating feature key again. The associated status light will go dark.
Multiple UUS Terminating reature keys can be programmed on your terminal. each with a separate message. If you have this configuration, press the appropriate feature key to select the message that will be sent to terminating calls.
1275·00030 | 103 |