Siemens W12 user manual Marking a directory entry as VIP, Dialing from stored caller-ID

Page 15

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Marking a directory entry as VIP

If a number is set to be a VIP one, when receiving such a call, you will hear the VIP ringer tone.

How to set the VIP call:

Press the Channel/Select key until “Store” appears on the display.

Press

or

key to browse the records.

Press the Mem/Prog key and “VIP” will appear on the display. (Press Mem/Prog again to cancel the VIP setting.)

Note: When finished, press the Exit key to exit.

Dialing from stored caller-ID

Be sure the handset or the base is in standby.

Press Select key until “Store” appears on the display. Or press Mem/Prog key to enter the two-digit storing location (01-16).

Press or key to browse and select the stored records. If too long, press the Next key to display other lists.

Then press the Talk key to dial the selected number.

Or

Press the Talk .

Press the Mem/Prog key.

Then enter the location in the directory (01-16).

Deleting a number in the Directory

Be sure the handset or the base is in standby.

Press the Channel/Select key until “Store” appears on the display.

Press or key to browse and select the incoming records. Then press the Delete, and then the screen will display “Delete”.

Press “Delete” again to delete the selected record.

Deleting all numbers in the Directory

Be sure the handset or the base is in standby.

Long press the Channel/Select key until “Store” appears on the display. Then press the “Delete”. Do not release it until the screen displays “Delete All”.

Press “Delete” again to delete all the records.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Cordless Phone Be inspiredTable of contents Page Install the phone Preparing the Phone for serviceDescription of display of the handset Descriptions of the function keys Indicators Description of the function keys on the handsetDescription of the function keys on the base Setting area code SettingsTone/pulse switch Setting the date and the timeSelecting Ringer Tones Adjust the LCD lightAdding IDD code to the incoming calls Adding prefix mark to the callsActivating/deactivating Ring Adjusting VolumeSelecting VIP Ringer Tones Selecting Caller Ringer TonesOutgoing call Basic operationAnswering a call Making a CallDeleting all outgoing call Using/Charging IndicatorSwitching channels Deleting outgoing callIncoming call records Temporary tone dialingSearching for handset Displaying incoming call numbersDeleting a single incoming call number Deleting all incoming numbersBrowsing and dial the incoming numbers Modifying stored phone numbers DirectoryBrowsing lists in the Directory Inserting a dialing pauseDeleting all numbers in the Directory Marking a directory entry as VIPDialing from stored caller-ID Deleting a number in the DirectoryStoring IP numbers Speed dialingIP dialing and calling back Setting PINSetting Lock Code PIN lockUnlocking and eliminate PIN Battery indicationCancel Lock Code Temporary UnlockingCare Replacing batteriesSafe use of the batteries Indicating informationCalls Hotline Next display
Top Page Image Contents