Siemens W12 user manual Description of display of the handset

Page 5

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Note: The dial mode of this phone has been set to tone dialing. If you want to change it to pulse dialing, please refer to the descriptions in the “Tone/Pulse Switch” section to turn to pulse. If you are not sure which mode to apply, please consult your phone service company.

9Place your base away from the “interference sources” (e.g.: TV, PC, microwave oven, refrigerator, etc.) and in a central position of its range, and if you can place it at a higher position, it will work better. To obtain the best performance, pull the antenna to its maximum length.

10Adjust the flash time to a required period of time.

Note: Use the power adapter 220V AC 9V DC 220mA in the package.

Using other power adapters might cause damages to your phone.

Note: The dial mode of this phone has been set to be tone dialing.

Description of display of the handset

Line

Number of callers

Channel

VIP records

Batteries. fully charged

Batteries empty

Incoming call records

Outgoing call records

Directory

Repeat call records

The ring is switched to “off” status

(Hour: minute

(Date-month) Display of “*”

Display of “#”

5

Image 5

Contents Cordless Phone Be inspiredTable of contents Page Install the phone Preparing the Phone for serviceDescription of display of the handset Description of the function keys on the base Descriptions of the function keys IndicatorsDescription of the function keys on the handset Tone/pulse switch SettingsSetting the date and the time Setting area codeAdding IDD code to the incoming calls Adjust the LCD lightAdding prefix mark to the calls Selecting Ringer TonesSelecting VIP Ringer Tones Adjusting VolumeSelecting Caller Ringer Tones Activating/deactivating RingAnswering a call Basic operationMaking a Call Outgoing callSwitching channels Using/Charging IndicatorDeleting outgoing call Deleting all outgoing callSearching for handset Temporary tone dialingDisplaying incoming call numbers Incoming call recordsBrowsing and dial the incoming numbers Deleting a single incoming call numberDeleting all incoming numbers Browsing lists in the Directory DirectoryInserting a dialing pause Modifying stored phone numbersDialing from stored caller-ID Marking a directory entry as VIPDeleting a number in the Directory Deleting all numbers in the DirectoryStoring IP numbers Speed dialingSetting Lock Code Setting PINPIN lock IP dialing and calling backCancel Lock Code Battery indicationTemporary Unlocking Unlocking and eliminate PINSafe use of the batteries Replacing batteriesIndicating information CareCalls Hotline Next display