Siemens W12 Deleting outgoing call, Deleting all outgoing call, Using/Charging Indicator

Page 11

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Deleting outgoing call

Be sure the handset or the base is in standby.

Press the Outgoing Call (Redial)

key or Channel/Select key until

“Outgoing Call” appears on the display.

Press

or

key to select the outgoing records.

Then press the Flash/Clear key. The screen will display “Delete”. Press Flash/Clear key again to confirm to delete the selected record, or press Exit key to give up.

Deleting all outgoing call

Be sure the handset or the base is in standby.

Press the Outgoing Call (Redial) key or Channel/Select key until “Outgoing Call” appears on the display.

Then long press the Flash/Clear key, do not release it until the LCD displays “Delete All”.

Press Flash/Clear key again to confirm to delete the selected record, or press Exit key to give up.

Using/Charging Indicator

When the handset is using or charging, the Using/Charging Indicator will on automatically.

When a call is coming, the Using/Charging Indicator will on and flash.

Call ending function

Press the End/Delete when finishing a call. Then you can make another call.

Note: Do not use key to end a call; otherwise the phone will hang up.

Switching channels

In events of interference when using the handset talking, press Channel/Select key to switch to another channel.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Cordless Phone Be inspiredTable of contents Page Install the phone Preparing the Phone for serviceDescription of display of the handset Description of the function keys on the base Descriptions of the function keys IndicatorsDescription of the function keys on the handset Setting area code SettingsTone/pulse switch Setting the date and the timeSelecting Ringer Tones Adjust the LCD lightAdding IDD code to the incoming calls Adding prefix mark to the callsActivating/deactivating Ring Adjusting VolumeSelecting VIP Ringer Tones Selecting Caller Ringer TonesOutgoing call Basic operationAnswering a call Making a CallDeleting all outgoing call Using/Charging IndicatorSwitching channels Deleting outgoing callIncoming call records Temporary tone dialingSearching for handset Displaying incoming call numbersBrowsing and dial the incoming numbers Deleting a single incoming call numberDeleting all incoming numbers Modifying stored phone numbers DirectoryBrowsing lists in the Directory Inserting a dialing pauseDeleting all numbers in the Directory Marking a directory entry as VIPDialing from stored caller-ID Deleting a number in the DirectoryStoring IP numbers Speed dialingIP dialing and calling back Setting PINSetting Lock Code PIN lockUnlocking and eliminate PIN Battery indicationCancel Lock Code Temporary UnlockingCare Replacing batteriesSafe use of the batteries Indicating informationCalls Hotline Next display
Top Page Image Contents