Gigaset 4010 Comfort, CHIN eng,
Temporary tone dialing
This function is designed for pulse dialing users, which can change the pulse dialing to tone dialing temporarily to access the service system that requires tone dialing. For example, after accessing banks or credit card companies, if the user wants to operate in their internal system, then he/she must change the pulse dialing to tone dialing temporarily.
For example, you are required to enter your bank account number:
1.Dial the bank’s number.
2.Press * key when putting through.
3.Act according to the voice instructions over the phone.
4.When finish, you can hang up the phone, and then the phone returns to pulse dialing.
Searching for handset
Press the Paging key on the base, handset will ring and last one minute. Press Talk key on the handset or press Paging key on the base again to stop the ring.
Displaying incoming call numbers
This phone can display incoming numbers from FSK or DTMF system and store up to 48 numbers.
Incoming call records
When you receive incoming calls, you will see their relevant records as below:
Note: You must apply for the Caller ID Service from your telecom companies to enable this function.
When you receive new incoming calls, the display will automatically update the number of the new incoming call.
12