Siemens W12 user manual Preparing the Phone for service, Install the phone

Page 4

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Preparing the Phone for service

The pack contains

zBase

zHandset

zRechargeable battery

zPhone cord

zPower supply units

zOne set of operating instruction

Install the phone

1.To open the battery compartment, press the battery cover of the handset and slide it down.

2.Insert the battery plug into the socket in the battery compartment and place the battery into the battery compartment.

3.Push up the battery cover.

4.Place the handset with batteries into the charger.

5.Raise the antenna.

6.Insert the plug of adapter into the socket on the back of the base, and then connect the other end into the 220V power supply. It’s in the status of charging when the LCD light.

Note: For the initial charge we recommend a continuous, uninterrupted charging period of more than twelve hours before using.

7.After charge, fit the small jack on the phone cord into the socket in the base and fit the other end into phone outlet.

8.If “Ringer Off” is shown on the display, please set the ringer tone to “ON” according to the descriptions in the “Ring switch” section.

4

Image 4

Contents Be inspired Cordless PhoneTable of contents Page Preparing the Phone for service Install the phoneDescription of display of the handset Description of the function keys on the handset Descriptions of the function keys IndicatorsDescription of the function keys on the base Settings Tone/pulse switchSetting the date and the time Setting area codeAdjust the LCD light Adding IDD code to the incoming callsAdding prefix mark to the calls Selecting Ringer TonesAdjusting Volume Selecting VIP Ringer TonesSelecting Caller Ringer Tones Activating/deactivating RingBasic operation Answering a callMaking a Call Outgoing callUsing/Charging Indicator Switching channelsDeleting outgoing call Deleting all outgoing callTemporary tone dialing Searching for handsetDisplaying incoming call numbers Incoming call recordsDeleting all incoming numbers Deleting a single incoming call numberBrowsing and dial the incoming numbers Directory Browsing lists in the DirectoryInserting a dialing pause Modifying stored phone numbersMarking a directory entry as VIP Dialing from stored caller-IDDeleting a number in the Directory Deleting all numbers in the DirectorySpeed dialing Storing IP numbersSetting PIN Setting Lock CodePIN lock IP dialing and calling backBattery indication Cancel Lock CodeTemporary Unlocking Unlocking and eliminate PINReplacing batteries Safe use of the batteriesIndicating information CareCalls Hotline Next display