Siemens W12 user manual Adding IDD code to the incoming calls, Adding prefix mark to the calls

Page 8

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

Adding IDD code to the incoming calls

For example, an incoming call display is “13928389222”, after set the international direct dial (IDD) code as “0”, will be “013928389222” because the telephone add a “0” before the incoming number.

Press the Mem/Prog key for 2 seconds

Press Channel/Select key until “Lo CodE” appears

Enter one digit of IDD code, which can be deleted by pressing the Flash/Clear key.

Press Mem/Prog key for confirmation Press Exit to exit

Adding prefix mark to the calls

Press the Mem/Prog key for 2 seconds

Press the Channel/Select key until “Add” appears

Enter one digit of “9”. (For example, you need to enter “9” for placing outgoing calls. When placing an outgoing call, you must enter “9” before

dialing out.)

 

 

Press the “Mem/Prog”(

/

) key for confirmation

Press Exit to exit

 

 

Adjust the LCD light

Press the Mem/Prog key for 2 seconds

Press the Channel/Select key until “LCD” appears

Press

or

to adjust the light

Press the Mem/Prog key for confirmation

Press Exit to exit

Selecting Ringer Tones

Press the Mem/Prog key for 2 seconds

Press the Channel/Select key until “Ring” appears

Press

or

to select the ringer melody. (8 melodies)

Press the Mem/Prog key for confirmation

Press Exit to exit

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Be inspired Cordless PhoneTable of contents Page Preparing the Phone for service Install the phone Description of display of the handset Description of the function keys on the base Descriptions of the function keys IndicatorsDescription of the function keys on the handset Settings Tone/pulse switchSetting the date and the time Setting area codeAdjust the LCD light Adding IDD code to the incoming callsAdding prefix mark to the calls Selecting Ringer TonesAdjusting Volume Selecting VIP Ringer TonesSelecting Caller Ringer Tones Activating/deactivating RingBasic operation Answering a callMaking a Call Outgoing callUsing/Charging Indicator Switching channelsDeleting outgoing call Deleting all outgoing callTemporary tone dialing Searching for handsetDisplaying incoming call numbers Incoming call recordsBrowsing and dial the incoming numbers Deleting a single incoming call numberDeleting all incoming numbers Directory Browsing lists in the DirectoryInserting a dialing pause Modifying stored phone numbersMarking a directory entry as VIP Dialing from stored caller-IDDeleting a number in the Directory Deleting all numbers in the DirectorySpeed dialing Storing IP numbersSetting PIN Setting Lock CodePIN lock IP dialing and calling backBattery indication Cancel Lock CodeTemporary Unlocking Unlocking and eliminate PINReplacing batteries Safe use of the batteriesIndicating information CareCalls Hotline Next display
Top Page Image Contents