Siemens 2015 Messages with telephone number transmission, To continue playback

29.10.99 kap12.fm5 Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619

The answering machine

If the intermezzo function is activated (➔ page 23), there is a pause in playback after each message and playback does not continue until key Whas been pressed.

The number of the current message is indicated on the 2-digit LED display at the base station. The messages are played back via loudspeaker and at the handset. The number is indicated au- tomatically at the start of each message. If the time stamp function is activated (➔ page 23), the time of the message is also indicated.

Messages with telephone number transmission

For further information, please refer to the section on re- mote operation functions under “Calling back callers”

➔page 53.

Skipping forwards and backwards during playback

	To move on to the next message:
Ê Press the key at the base station.
or
	To play back the current message again:
È Press the key at the base station briefly (< 1 sec.).
or
ÈÈ ...	To skip back several messages:
	Press the key several times in quick succession
	(maximum of 1 sec. between keystrokes).
or
	To skip back to the first message:
È Hold down the key at the base station.
		Note when branching forwards to the next
		message: after a message has been played
		back for two seconds, it is classified as having
		been “listened to”.
Interrupting playback

Press the key at the base station. Playback is interrupted.

ÌA reminder announcement is provided: “Pause“.

To continue playback:

É

Press the key.

Aborting playback (cancelling)

Press the key at the base station twice. An acknowledge-

ÌÌ

ment tone is heard.

49