Paging
PAGING
(Optional)Persons equipped with a wireless paging receiver or assigned to a lamp signal, can be paged from a telephone set. Depending on the type of paging system it is possible to send digit messages or voice messages to the paged person.
Paging can also be initiated and answered during an ongoing call. Make an Inquiry call and proceed according to the appropriate procedure for the type of connected paging system. You can then either return to the ongoing call or transfer the paging call to the person to the call that was put on hold. If this person is an external subscriber, your exchange must be programmed for this function.
If you receive a congestion tone when paging, this indicates that the paged person has his paging receiver in the charging rack and is probably out of the office.
Paging receivers without a display and paging via lamp signals
When there is no answer or a busy tone, keep the telephone off hook:
7Press
Wait for an answer with the telephone off hook.
If you want to start paging without calling the person:
8 1 | Press |
Dial the extension number and press
Wait for an answer with the telephone off hook.
50 | DT368 |