Setting up Voice Mail
If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. The new message LED flashes whenever you have messages waiting in your voice mailbox. If you have programmed your access number into your phone, you can simply press the [
] soft key to access your voice mail. When you subscribe to the service, your voice mail provider provides you with the access number and the required voice mail signaling tone.
Setting the Voice Mail Signaling Tone
Your telephone service provider should provide you with the specifics of your voice mail service upon your enroll- ment. If you are having trouble with your message waiting indicator on your phone not illuminating when you have waiting messages, you will need to contact your service provider and inquire as to which type of message notification
If your voice mail service uses a FSK message signal to alert you of a new voice mail message, you will need to turn off the Voice Mail Tone. If your voice mail service uses a SDT message signal to alert you of new voice mail messag- es, you can leave the Voice Mail Tone on.
Follow the instructions below to set up your cordless phone settings:
) Press the MENU soft key. Select the GLOBAL SETUP menu, then the VOICE MAIL TONE submenu.
2)Move the cursor to set the voice message indication (SDT message signal) to ON or OFF.
3)Press the OK soft key. You hear a confirmation tone.
20