C. Crane TRU9460 manual Registering TCX805/TCX905 Accessory or Extra Handsets

Registering TCX805/TCX905 Accessory or Extra Handsets

If you purchase an accessory handset, you need to register the handset before use. Only one handset can be reg- istered at a time. Handsets supplied with the phone are registered to the base by the factory. When charged, pre- registered handsets display a handset ID number. Handsets that have not been registered display MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base. See Resetting the Handsets on page 24.)

When you register an extra handset to the base, the handset ID will be assigned.

Models		vary!		registration
Place		Handset	↔	or refer	to
on	the	base for		Owner's	Manual
)	Before registering the TCX805/TCX905 accessory or other extra handset, the battery pack MUST be charged
	for 15-20 hours.

2)Place the handset in the base charging cradle to begin registration.

3)While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION COMPLETE is displayed; the handset has been registered to the base. If REGISTRATION FAILED appears, please try these steps again.

Registering Other Compatible Handsets

) With the base in standby, press [Registration] key on the bottom of the base for 5 seconds until the charge/ in use LED flashes.

2)On the handset, press and hold [#] until you hear a beep.

3)While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION COMPLETE is displayed; the handset has been registered to the base. If REGISTRATION FAILED appears, please try these steps again.

23