BT 2500 manual Answer delay, Press To scroll through the settings, which are, Displayed

Page 31

5301 BT Freestyle 2500 UG [5] 22/1/04 8:41 am Page 31

BT Freestyle 2500 – Edition 05 – 12.12.03 – 53011

Answer delay

Answer delay sets the number of times your BT Freestyle 2500 will ring before the answering machine picks up your call. The default setting is 6 rings. You can change this setting to 2-9 rings or to time saver mode.

At the base:

1.Press and hold ◀ until the current setting is announced (setting flashes), then release.

2. Press

◀

to scroll through the settings, which are

announced with each press.

 

When you hear and see on the message counter the

setting you want, release

◀

. The setting is announced

 

 

 

 

 

 

again as confirmation.

 

 

 

Check answer delay setting

 

1. Press and release

◀

, the current setting is announced

and displayed.

Answering machine

31

Time Saver

Time Saver can save you the cost of a call when you want to ring in to find out if you have new messages. If your answering machine answers after 2 rings, you have new messages. If you have no new messages it will answer after 6 rings. So if you hear a third ring, you can hang up before you are connected, saving you the cost of a call.

Page 30 Page 32
Image 31
Page 30 Page 32
Contents
User Guide Welcome… Freestyle 2500 handset with belt clip Getting started This guideDialling mode Switch on/off Registering a BT FreestyleSelect answer mode Memory full Safety Answer delay GuaranteeGetting started Setting up Plug the mains power cable into the baseHandset on the base. The red Charging light comes on This is shown on the display. When the handset is fullySymbol Charge the handset for at least 16 hours by placingPress To confirm Day and time setting is announced in full Check day/timeTime/Set . The current day and time are BT Freestyle Default settings for yourDay/Time Saturday 1201pm Answer Delay Answer Mode Base loudspeaker volume Base ringerHandset buttons Getting to know your phoneSteady Flashing Time/set Base/Answering machinePress press Prog to confirm Press and hold Prog to open the main menu and selectPress and hold Prog , a P appears in the handset display Then 5 . Now select the melody by pressing 1Menu map Press Clr. to delete an incorrect digit Using the phoneHandsfree Press Handsets When it answers, press to transfer the callQuickdial directory Directory are deleted To confirm Press dial Delete all Quickdial entriesPress and hold Prog , then 0 then Press ProgHandset settings Default setting is on Keypad lock Handset settings Caller Display Using the Calls listCaller Display Then Date and time it was receivedAre deleted Answering machine For 10 seconds Outgoing messages Press and hold Select to Answer Only Memory full Press To scroll through the settings, which are Answer delayDisplayed Working with a fax machine Button. The new setting isAudible message alert Playback Message playbackPlaying messages At any time to stop playbackDelete all old messages Goes up by Record a memoJust as messages After the toneConfirm. The new digit is announced Remote accessRemote access Additional handsets Registering another GAP compatible handset Handset beeps when de-registration is completeReplacing the handset batteries HelpHelp See your fax user guide for details Calls do not get through to a connected fax machineGeneral information SafetyGeneral information General information This guarantee does not affect your statutory rights GuaranteeBT Freestyle 2500 UG 5 22/1/04 841 am How many telephones can you have? Technical informationDeclaration of Conformance Technical information Dialling mode Offices worldwide
Related manuals
Manual 73 pages 57.32 Kb
Top Page Image Contents