BT 2500 manual Press To confirm, Day and time setting is announced in full Check day/time

Page 8

5301 BT Freestyle 2500 UG [5] 22/1/04 8:41 am Page 8

BT Freestyle 2500 – Edition 05 – 12.12.03 – 5301

8Getting started

1.Press and hold Time/Set until you hear “Please set day and time” and the current setting on the message counter flashes.

2. Press			◀ or	◀	to hear and select the day then press
			to confirm.
	Time/Set
	You can scroll through the settings by holding down the
	◀	button. 1 = Monday, 7 = Sunday.

3. Press

◀or

◀

to hear and select the hour then press

Time/Set to confirm.

4. Press	◀ or	◀	to hear and select the minute then
press		to confirm.
press	Time/Set	to confirm.

The day and time setting is announced in full.

Check day/time

1.Press and release announced.

Time/Set . The current day and time are

Your BT Freestyle 2500 is now ready for use and the answering machine is switched ON.

Image 8

Contents

User Guide Welcome… Freestyle 2500 handset with belt clip This guide Getting started Switch on/off Registering a BT Freestyle Select answer mode Memory full Safety Answer delay Guarantee Dialling modeSetting up Plug the mains power cable into the base Getting startedThis is shown on the display. When the handset is fully SymbolCharge the handset for at least 16 hours by placing Handset on the base. The red Charging light comes onTime/Set . The current day and time are Day and time setting is announced in full Check day/timePress To confirm Default settings for your Day/Time Saturday 1201pm Answer DelayAnswer Mode Base loudspeaker volume Base ringer BT FreestyleGetting to know your phone Handset buttonsSteady Flashing Base/Answering machine Time/setPress and hold Prog to open the main menu and select Press and hold Prog , a P appears in the handset displayThen 5 . Now select the melody by pressing 1 Press press Prog to confirmMenu map Using the phone Press Clr. to delete an incorrect digitHandsfree Press When it answers, press to transfer the call HandsetsQuickdial directory To confirm Press dial Delete all Quickdial entries Press and hold Prog , then 0 thenPress Prog Directory are deletedHandset settings Default setting is on Keypad lock Handset settings Caller Display Using the Calls listCaller Display Are deleted Date and time it was receivedThen Answering machine For 10 seconds Outgoing messages Press and hold Select to Answer Only Memory full Displayed Answer delayPress To scroll through the settings, which are Audible message alert Button. The new setting isWorking with a fax machine Message playback Playing messagesAt any time to stop playback PlaybackDelete all old messages Record a memo Just as messagesAfter the tone Goes up byRemote access Confirm. The new digit is announcedRemote access Additional handsets Handset beeps when de-registration is complete Registering another GAP compatible handsetHelp Replacing the handset batteriesHelp Calls do not get through to a connected fax machine See your fax user guide for detailsSafety General informationGeneral information General information Guarantee This guarantee does not affect your statutory rightsBT Freestyle 2500 UG 5 22/1/04 841 am Technical information How many telephones can you have?Declaration of Conformance Technical information Dialling mode Ofﬁces worldwide

Related manuals

Manual 73 pages 57.32 Kb