BT 2500 manual Getting started, Setting up Plug the mains power cable into the base

Page 6

5301 BT Freestyle 2500 UG [5] 22/1/04 8:41 am Page 6

BT Freestyle 2500 – Edition 05 – 12.12.03 – 5301

6Getting started

WARNING

Do not place your BT Freestyle 2500 in the bathroom or other humid areas.

Handset range

The handset reception range from the base is up to 300m outdoors and up to 50m indoors. Thick stone walls can severely affect the range.

Signal strength

The symbol on your handset screen indicates when you are in range. When you are out of range, it flashes and the screen displays

OUT OF RANGE.

IMPORTANT

Do not connect the telephone line until at least one of the handsets is fully charged.

The base station must be plugged into the mains power at all times.

Location

You need to place your BT Freestyle 2500 within 2 metres of a mains power and telephone socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical appliances to avoid interference.

Your BT Freestyle 2500 works by sending radio signals between the handset and base. The strength of the signal depends on where you site the base. Putting it as high as possible ensures the best signal.

Setting up

1. Plug the mains power cable into the base.

Which socket?

Power socket

Telephone line socket

The green Power/In use light comes on and the answering machine is switched On.

Image 6 Contents
User Guide Welcome… Freestyle 2500 handset with belt clip This guide Getting startedMemory full Safety Answer delay Guarantee Switch on/off Registering a BT FreestyleSelect answer mode Dialling modeSetting up Plug the mains power cable into the base Getting startedCharge the handset for at least 16 hours by placing This is shown on the display. When the handset is fullySymbol Handset on the base. The red Charging light comes onDay and time setting is announced in full Check day/time Press To confirmTime/Set . The current day and time are Answer Mode Base loudspeaker volume Base ringer Default settings for yourDay/Time Saturday 1201pm Answer Delay BT FreestyleGetting to know your phone Handset buttonsSteady Flashing Base/Answering machine Time/setThen 5 . Now select the melody by pressing 1 Press and hold Prog to open the main menu and selectPress and hold Prog , a P appears in the handset display Press press Prog to confirmMenu map Using the phone Press Clr. to delete an incorrect digitHandsfree Press When it answers, press to transfer the call HandsetsQuickdial directory Press Prog To confirm Press dial Delete all Quickdial entriesPress and hold Prog , then 0 then Directory are deletedHandset settings Default setting is on Keypad lock Handset settings Using the Calls list Caller DisplayCaller Display Date and time it was received ThenAre deleted Answering machine For 10 seconds Outgoing messages Press and hold Select to Answer Only Memory full Answer delay Press To scroll through the settings, which areDisplayed Button. The new setting is Working with a fax machineAudible message alert At any time to stop playback Message playbackPlaying messages PlaybackDelete all old messages After the tone Record a memoJust as messages Goes up byRemote access Confirm. The new digit is announcedRemote access Additional handsets Handset beeps when de-registration is complete Registering another GAP compatible handsetHelp Replacing the handset batteriesHelp Calls do not get through to a connected fax machine See your fax user guide for detailsSafety General informationGeneral information General information Guarantee This guarantee does not affect your statutory rightsBT Freestyle 2500 UG 5 22/1/04 841 am Technical information How many telephones can you have?Declaration of Conformance Technical information Dialling mode Offices worldwide
Related manuals
Manual 73 pages 57.32 Kb