BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191
To use walk and talk | Room monitor |
To call a handset:
When you have switched walk and talk mode on for at least two handsets as shown on page 40:
Press the GREEN PHONE button.
Display will show Walk and Talk
Call to all
All handsets that are in walk and talk mode will be called. The connection will be made with the first handset to answer the walk and talk call.
To answer a call:
Press the GREEN PHONE button to take the call.
To end a call:
Press the RED PHONE button.
You can use a handset as a room monitor. If a certain noise level is reached, for example a baby crying, the handset will automatically dial an internal or external number which you have set.
The following points should be considered when using the room monitor:
•If you store an external number that has an answering machine connected, it should be switched off.
•Make sure Call barring is not set.
•Any incoming calls on the handset being used as the room monitor will not ring at the handset, however, the display will show when you have a call.
•The battery power is used up more quickly. If using for long periods of time it may be advisable to place the handset in the base to ensure that the battery does not run out.
•When an external number is called it will ring for approximately 90 seconds but room monitor calls to an internal number are unlimited.
HANDSET SETTINGS
BT Diverse Helpline – 08457 908 070
41