Beko BD 220 Three way conference call, Register another HM base to HM Handset, Base Selection

Page 24

Three way conference call

If you have more than one handset registered to your DECT phone base, you can have 3-way simulataneous conversation. You should know the number of the other handset registered to your DECT phone base.

1.When you engaged in an external (EXT) call, press the CANCEL/INT followed by the handset number where you wish to transfer the call. While calling the other handset, the EXT call is on hold. The called handset need to accept the INT (internal) call by pressing the TALK-ON button.

2.Once the called handset answer the call, press and hold the

# button to initiate 3-way conference call.

3.If the other handset is no answer or do not want to take the EXT call, press CANCEL/INT in your handset to return to the EXT call.

Register another HM base to HM Handset

Before registering another HM base to your HM handset, make it sure that this base is not yet registered to 5 handsets. The base can only accept 5 handsets registration. The handsets can be registered with up to 4 bases simultaneously.

-To register another HM base to HM handset, following the same step of Registering a New Handset in the previous page.

Register Another DECT GAP compatible Base

For registration of another DECT base to your HM handset, you should know the procedure for registration of this base and the PIN code. Please refer the User guide of that Base. Make sure that this base has not yet reached the maximum handset it can register. Note : Some special features of HM handset, such

as real time clock, VIP etc may not be available when using different GAP Base DECT phone.

Base Selection

There are two options for use when setting the base selection method:

Auto: Set the base selection setting to AUTO, so that whenever the handset-base link is lost or when the system powers up, the handset searches to connect to any available registered base.

Fixed: By assigning one of the registered bases to be fixed, it will be the only base to be searched for when the handset-base link is lost or when the system powers up.

To select base station

1.Press OK/Menu button. PHONEBOOK is displayed.

2.Use DOWN button to scroll to REGISTRATION.

3.Press OK/Menu button. REGISTER is displayed.

4.Use DOWN button to scroll to SEL BASE.

5.Press OK/Menu button.

6.Use the UP & DOWN button to select the base number (from 1 to 4) or select AUTO. Note: If you select AUTO, it will select the base with strongest signal and the first base it will search. (Note: Base numbers shown with an o in fornt of the number are those that your handset is registered with. You can only select a base number with an o in front of it or the AUTO option.)

7.Press OK/Menu button. The handset will beep and then it will confirm the SYNC with a beep. If the handset LCD display base 1 or BASE n (where n is base number) keep on flashing, it cannot find the base. In this case, set it to AUTO.

8.Press TALK-OFF button to escape to the standby mode.

-24 -

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Page Contents Earpiece/Receiver Talk-Off / Esc / Power INT / CancelDisplay Speaker phone / HandsfreeLCD Display on Handset Handsfree speaker is in useMenu Options Date / TimeQuick Reference Guide FunctionWhat is in the box Radio signal between handset and baseConnection and condition for use Choosing a site for the BaseElectrical Safety Charging the batteriesEmergency calls Starting UP Standby mode display DectUsing Your Phone To make and end callsPreparatory dialing pre-dial Receiving external callsUsing Mute Using Recall FlashUsing Pause function Adjust the handset earpiece during a callUsing Phone Book Switching your handset On or OffFunction Out of range warningTo access phonebook via Menu option Reviewing the phonebookDialing a phone book entry Editing an entry in the phone book Deleting an entry in the phone bookDeleting all entries in the phone book Caller ID To store a CID entry in the phonebook Deleting a CID recordCall back from the calls list Voice Mail Box Message WaitingVoice Mailbox Hot Key Review MessagePersonalizing Your Setting Setting the handset ringer volumeSetting Base Ringer Volume Selecting Base Ringer melodiesSetting Handset earpiece Speakerphone Volume Alert tonesNaming the Handset Language selectionKeypad lock Auto AnsweringExpanding Your Dect System Adding new handsetRegistering a new handset On the baseRegister Another Dect GAP compatible Handset Multi Handset UseCall Shuttle Internal outgoing callsThree way conference call Register another HM base to HM HandsetRegister Another Dect GAP compatible Base Base SelectionAdvanced Features ProgrammingChange PIN Code De-registering a handsetReset to factory default settings Quick ResetPause time selection Default setting parameters Technical DetailsPabx Access Code and Pause ? Do you need Recall Flash? USE in BusinessDialing type Do you need a PAUSE?Troubleshooting Guide Problems Possible Cause Action Taken
Top Page Image Contents