HOW to SET Callback Number, HOW to SET Time

RINGER ON

GX2411ci English I/B ver. 09010A-1

3.Enter your 3 digits area code.

4.If your area is not Split area, press SCAN / PRG button to save and exit.

5.If your area is one of the Split area, enter neighboring area code.

817_ _ _ _ _ _

AREA CODE

817 913 412 AREA CODE

817 = User's area code, 913 and 412 = Neighboring area code.

6.Press SCAN / PRG button to save and exit.

NOTE: If the number is incorrect, press DEL button and restart on step 3.

E. HOW TO SET CALLBACK NUMBER

This is the number of digits to be called back when making a call using the Call Record
and when the area code of the incoming telephone number is same
as your area code. Refer to Callback Dial Operation on page 24.				07
The factory setting is 7 digits.
				CALLBACK NUMBER
1.	Press SCAN / PRG button.

2.	Press 4 button, or press (+) button four times. The Callback

3.	Number is displayed.			10
	Press	or	button to change the Callback Number.
				CALLBACK NUMBER
	The Callback number scrolls as 07 10 07 10.

4.Press SCAN / PRG button to save and exit.

F. HOW TO SET RINGER ON / OFF

1. In standby mode, press SCAN / PRG button.

2.Press 5 button, or press (-) button three times. The current mode is displayed.

3.	Press	or	button to change mode.	RINGER OFF

4.	Press SCAN / PRG button to save and exit.

G. HOW TO SET TIME

NOTE: The time set is for the LCD Display time. If CALLER ID signal comes in, the time will adjust automatically.

1.	In standby mode, press SCAN / PRG button.	12:20 AM 10/20
2.	Press 6 button, or press (-) button two times. The current time
		TIME SET
	is displayed.

3.Enter 2 digits hour. The position to edit is blinking.

Use button to move the cursor to the left.

4.Enter 2 digits minute.

5.Press 1 for AM and 2 for PM.

6.Enter 2 digits month.

7.Enter 2 digits day.

8.Press SCAN / PRG button to save and exit.

H. HOW TO ADJUST THE CONTRAST OF LCD DISPLAY

1.In standby mode, press SCAN / PRG button.

2.Press 7 button, or press (-) button once. The current contrast is displayed.


3.	Press	or	button to change the contrast.
	The contrast scrolls as 01			02 03 (Three steps).	02
4.	Press SCAN / PRG button to save and exit.				CONTRAST

NEW CALL / MESSAGE INDICATOR

On the base unit, NEW CALL LED indicator will flash every 1second when new call comes in. NEW CALL LED indicator will flash every 2 second when voice mail message comes in. On the handset, NEW CALL LED indicator will flash every 2 seconds.

09010A-1	26
OWNER’S MAN # GX2411ci VER. 09010A-1
PAGE: 26	English version