GX2411ci English I/B ver.
CHECKING THE OGM
1.In standby mode, press the OGM PLAY button on the
base unit to hear your previously recorded OGM. | (Figure 20) |
2.You can stop OGM playback anytime during playback by pressing the STOP button.
RECORDING A MEMO
Memo message(s) is recorded remotely on the handset. The maximum recording time is 2 minutes.
1.In standby mode, press the REMO button on the handset. The GX2411CI will prompt “You have no new message. For help, press 9.”
2.Press MEMO REC button. The GX2411CI will
prompt “Please record |
|
your message after the beep. To stop, press star |
|
(*).” |
|
3. After hearing a long beep, begin your message. | (Figure 21) |
4.Press star (*) to stop recording.
5.Press REMO button to exit the remote mode.
Otherwise, the unit will automatically turn off if not in use for 8 seconds.
PLAYING BACK MESSAGES
If the MEMO or MSG LED indicator is on , it indicates that you have Memo or ICM message(s). If it is blinking, it indicates that there is new message(s). The blinking counts mean the number of new messages.
A. PLAYING MESSAGES |
|
In standby mode, press the MEMO or MSG PLAY button on |
|
the base unit . The GX2411CI will announce “You have |
|
(number) (Memo) message.” and begins playing the first |
|
message to the end. It will announce the message number |
|
before each message. |
|
(Figure 22) |
|
B. SKIPPING MESSAGES |
|
Press the (Skip) button on the base unit during message |
|
playback to skip forward to the next message. |
|
C. PREVIOUS MESSAGES |
|
Press (Previous) button once on the base unit during |
|
message playback to skip backward one message. | (Figure 23) |
D. STOP MESSAGE PLAYBACK |
|
Press the STOP button to stop message playback. |
|
ERASING MESSAGES
A.SELECTIVE ERASING
1.Press the ERASE button on the base unit during message playback.
2.The GX2411CI will announce “(Message) (Memo) (number) erased.” and then start the next message.
NOTE: Erased messages cannot be retrieved. There is a momentary delay after erasing messages to allow the
GX2411CI to reorganize and optimize its memory space. | (Figure 24) |
B.ERASING ALL ICM AND TWO-WAY RECORDINGS
1.In standby mode, press and hold the ERASE button for about 2 seconds.
2.The GX2411CI will announce “Message (number) erased. You have no message.”
19 |
OWNER’S MAN # GX2411ci VER.
PAGE: 19 | English version |