Audiovox GX2411ci manual Troubleshooting, Symptoms Possible Solution / Cause

GX2411ci English I/B ver. 09010A-1

TROUBLESHOOTING

SYMPTOMS			POSSIBLE SOLUTION / CAUSE
No dial tone	∙	Check that the telephone line cord connectors at both ends
		are pushed in firmly until they click.
	∙ If you had a power failure or had unplugged the base unit,
		replace the handset on the base unit for two to five seconds
		to reset the system.
Does not ring	∙	Check the RING ON/OFF switch on the handset. Set to the
		RING ON position to enable the handset ringer.
	∙ Check that the telephone line cord connectors at both ends
		are pushed in firmly until they click.
	∙ You may have exceeded the Ringer Equivalence Number
		(REN) limit of how many phones can be connected to the
		same line. The REN total of all devices (printed on the
		bottom label of each unit) should not exceed five (5).
		Disconnect the appropriate units to lower the REN total.
No power on the	∙	Check	the Ni-Cd battery pack for proper connection inside
handset unit		the battery compartment on the handset.
	∙ The handset rechargeable Ni-Cd battery pack may need
		charging.
Does not charge	∙	Check	the Ni-Cd battery pack for proper connection inside
		the battery compartment on the handset.
	∙ The charging contacts and terminals may need cleaning
		with an alcohol-dampened swab.
Range is limited	∙	Move the base unit so that it is centrally located in your
		residence or office and make sure that the base unit is not
		located near appliances.
	∙ The handset Ni-Cd battery may be weak. Recharge the Ni-
		Cd battery.
09010A-1			30
OWNER’S MAN # GX2411ci VER. 09010A-1
PAGE:		30	English version