
Removing and Attaching Battery Covers
Your phone’s batteries are shipped uncharged and fitted with protective covers. Before you install the batteries, remove these covers, and save them for storing unused batteries. The covers prevent metal objects from contacting the battery terminals, reducing the risk of injury or damage from a battery short circuit. (See ”Charging Batteries” on page 16 when you’re ready to begin charging your battery.)
Removing the Main Battery Cover
1. Press and hold the release latch.
2. Pull the battery upward, out of its cover.
Attaching the Main Battery Cover
1. Set the edge of the battery opposite the release latch into the cover.
2. Lower the release latch side of the battery into the cover until the latch clicks into place.
Removing the Auxiliary Battery Cover
1. Hold the battery securely with one hand.
2. With the thumb of your other hand, push the base of the cover upward.
3.Continue pushing until the cover slides
free of the pins on the bottom of the battery, and swing the cover away from the battery.
Attaching the Auxiliary Battery Cover
1. Slide the curved end of the cover onto the hook on top of the battery.
2. Push the cover firmly upward until the base of the cover slides past the battery pins; then release.
Getting Started
13