Topcom 5400 user manual Getting Started, Installing the Base, Installing the Handset

Topcom Butler 5400

1 GETTING STARTED

1.1INSTALLING THE BASE

For installation, do the following:

•Plug one end of the adaptor into the outlet and the other end into the adapter jack on the bottom of the telephone.

•Connect one end of the telephone cord with the wall phone jack and the other end to the bottom of the telephone.

•Put the telephone-and AC power line cord in the base quides as shown on the picture below:

TEL

Power cable

Telephone cord

1.2INSTALLING THE HANDSET

ENGLISH

•Open the battery compartment (see below).

•Insert the batteries respecting the (+ and -) polarity.

•Close the battery compartment.

•Leave the handset on the base unit for 20 hours. The Line/Charge indicator up.

Cover

back view of hand-set

Rechargeable Batteries

-

(LED) on the base unit will light

+

+ -

Before you use the telephone for the first time, you must first make sure the battery is charged for 20 hours. If you do not do this, the telephone will not work optimally.

1.3IF YOU HAVE PURCHASED A TWIN/TRIPLE VERSION

If you have purchased a Twin or triple verion

•Plug one end of the adaptor into the outlet and the other end into the adapter jack on the bottom of the charger.

•Insert the battries inside the handset

•Charge the handset for at least 20 hours.

Topcom Butler 5400 85