Topcom 4872 manual Safety instructions, Getting started, English, Installing the base

Safety instructions

English

1Safety instructions

•Only use the charger plug supplied. Do not use other chargers as this may damage the battery cells.

•Only insert rechargeable batteries of the same type. Never use ordinary, non-rechargeable batteries. Insert rechargeable batteries so they connect to the right poles (indicated in the battery compartment of the handset).

•Do not touch the charger and plug contacts with sharp or metal objects.

•The operations of some medical devices may be affected.

•The handset may cause an unpleasant buzzing sound in hearing aids.

•Do not place the basic unit in a damp room or at a distance of less then 1.5m away from a water source. Keep water away from the handset.

•Do not use the telephone in environments where there is a risk of explosions.

•Dispose of the batteries and maintain the telephone in an environment-friendly manner.

•As this telephone cannot be used in case of a power cut, you should use a mains-independent telephone for emergency calls, e.g. a mobile phone.

2Getting started

2.1Installing the base

For installation, do the following:

1Plug one end of the adaptor into the outlet and the other end into the adaptor jack on the back of the base.

2Connect one end of the telephone cord with the wall phone jack and the other end to the bottom of the telephone.

3Put the telephone- and AC power line cord in the base guides as shown on the picture below.

English

1