Univex 1856 Especially about corded telephones, Especially about telephones answering systems

Page 40

Appendix

Important product information

Especially about corded telephones

•Electrical power: The telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made if the telephone base is unplugged or switched off, or if the electrical power is interrupted.

•Power adapter: This power adapter is intended to be plugged into a vertical wall outlet or a floor outlet. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

Especially about telephones answering systems

Two-way recording: This telephone does not sound warning beeps to let the other party know that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the call.

SAVE THESE INSTRUCTIONS

Image 40

Contents User’s manual Congratulations Stop Table of contents Quick reference guide PROG/MEMParts checklist Before you install Avoid placing the telephone base too close toTelephone base installation Installation options Wall mountingTabletop installation Telephone settings ContrastCall history Repeated callsLanguage Home area code/local area codesTo set the home area code To set the local area codesTo adjust ringer volume Telephone operationMaking and answering calls Last number redialTo adjust listening volume Options while on callsTimeouts and error messages DirectoryMemory capacity Directory cardSpeed dialing To store a number in speed dialTo change numbers To call a number in speed dialOne-touch dialing To store number in one-touchTo call a number in one-touch Chain dialingCaller ID history Information about caller ID with call waitingCaller ID history How caller ID worksTo review the call history To review the call historyTo return a call Dialing optionsTo copy an entry into memory Delete or copy an entryTo delete entries Message guard memory for power failure Message counterMessage capacity Memory monitorAnswering system mode To turn the answering system offTo turn the answering system on Call screeningTo set day and time Day & time announcementsTo check day and time Outgoing announcements To record your outgoing announcementTo play your outgoing announcement To delete your outgoing announcementAnnounce only mode To turn announce only on or offFeature options Changing feature optionsSkip or What is priority call code? Announcement moniMessage playback Announcements during message playbackOptions during playback To delete all messagesTo record a memo To record & play memosTo play back a memo To record a phone conversation To record & play a phone conversationTo play back a memo or a telephone conversation Message counter displays Message counter displaysRemote access Delete the messagesIndicator lights Display screen messages, tones & lightsScreen icons Alert tonesTroubleshooting Test a working telephone at the same telephone jack. If Power failure Troubleshooting Important product information Especially about corded telephones Especially about telephones answering systemsProduct identifier and REN information FCC and Acta informationConnection and use with the nationwide telephone network Programming/testing of emergency numbers Repair instructionsRights of the telephone company Hearing aid compatibilityPart 15 of FCC rules Limited warranty Limited warranty Limited warranty Technical specifications Index Remote access wallet card Action