Shiro SD8141 manual Navigation method into menu, Date & Time setting

Page 11

Caller Identity (workable only if subscribed with network operator)

SD8141 is able to display the caller number. If the caller number is stored into the phone book, the name will be displayed. It stores the last 20 calls automatically (the

symbol

on LCD screen and the light

on the base will blink when the call is not

answered). To see the caller list, press

key and then

 

RD keys to list the

content. Pressing

when the number is displayed, will reflect the date and time of

the call. If you press again

 

 

key, display will show "SAVE? ". If you press

key

 

 

again, you can store

the call number on the phonebook. Input the location name of

this number and press

 

key to confirm the name and press

key to confirm the

number.

 

 

 

 

 

 

 

 

 

However, if you wish to delete the caller number, press

key when display shows

"SAVE? ". The display will show "DELETE". Confirm by pressing the key. ATTENTION: Date and time are available only on PSTN lines and not on ISDN lines.

If you like to call the number reflected on the LCD screen, press key and it will be dialled out automatically.

Navigation method into menu

SD8141 is endowed with an intuitive system of listed menu and sub-menu. The

Key allows

input into the main tree of menu. Pressing RD

or

keys allow the

menu to be listed. Pressing

 

key allows input to the sub- menu.

 

 

 

Pressing the

key allows you to return to the previous menu. Press and hold the

same key allows you to escape from menu and come back in the stand-by mode. NOTE: For the subsequent steps, the procedure to input the main menu will not be mentioned anymore .

Date & Time setting

SD8141 is equipped with automatic clock setting system. If you are using it with an analogue line PSTN (not ISDN) with the caller ID enabled, the clock will be set automatically when there is an incoming call. Otherwise, the clock have to be set manually with the following procedure:

- under sub- menu "HANDSET", search for "CLOCK". Enter this menu and select "SET

CLOCK". Set hours then press key . Set minutes then press key. Set month

then press key. Set date.

Press

to confirm. To auto setting, go to sub-menu, "CLOCK", search for

“AUTOMATIC”. Select

 

and set "YES " if you like the auto setting or select "NO ". Press

 

to confirm. This will automatically set the handset’s date and time based on the FSK CID of the PSTN network.

Under the sub- menu, go to "CLOCK ", press "OK ". If you prefer not to display the clock

onto the LCD Screen, press "OFF ". Press

 

to confirm.

 

10

Image 11
Contents Page Technical data AccessoriesPag OK button Glance guide to the buttons on your handset. The handsetMEM button Phone buttonHands free speaker phone key Key and symbols descriptionCaller identification list access key and down arrow Redial list key / up arrowBelt clip Quick guide to the buttons on the base BaseInstallation and Setting Up Installing and using your SD 8141digital cordless telephonePrecautions AC/DC adaptor installationBattery installation Battery chargingHandset On/Off Before using the unit, checkHow to answer incoming call Adjustment of receiver volumeLast number redial Using earphoneMicrophone mute Putting the caller on holdNavigation method into menu Date & Time settingKeypad lock Handset ringer volume settingHandset ringer tone setting Base ringer volume settingLanguage display setting Base ringer tone settingRinger priority setting Timer enabling/disablingTo delete all entry memory Phone bookTo modify entry memory To delete entry memoryPIN code changing Alarm settingDialing mode setting Reset to default valueDisabling call barring Pabx codeCall barring LCR Least Cost Routing How to enable / disable LCRSetting LCR Primary Setting LCR RoutableSubscription of optional handset Setting LCR SpecialSetting LCR Others Multi handset configurationCall transfer between handsets Multi base configurationDe-subscribe an handset Intercommunication between handsetsBaby sitting room monitor Subscribe handset to another base Base search