Shiro SD8141 manual Keypad lock, Handset ringer volume setting, Handset ringer tone setting

Keypad lock

To lock the handset keypad:

- enter sub-menu "KEY LOCK" which is in the main menu. Choose "YES " (lock enabled) or

"NO " (lock disabled), press		to confirm.
To unlock keypad, press	key three times .

Warning and confirmation tone On/Off

There will be a warning beep when the phone is Out of range, Low Battery, Confirmation at Programming and Key Click. These tones can be disabled by:

-enter sub- menu "HANDSET" which is in the main menu, search for "TONES". Enter this menu and search for the tone you wont to disable or enable between "KEY ,RANGE,

LOW BATT " and "CONFIRM", press		, select "YES " (tone enabled) or "NO " (tone
disabled), press	to confirm.

Handset ringer volume setting

You can set up to 4 different volume levels or disable the handset ringer (handset will not ring). To set, follow this procedure:

-enter sub-menu "HANDSET" which is in the main menu, search for "RINGER". Select the

desired volume level by RD or keys (included for ringer off -"VOL OFF",”,

symbol will be displayed on LCD screen). Press to confirm.

Alternatively, with an incoming call, adjust the ringer volume directly by pressing RD

or keys.

Handset ringer tone setting

Set up to 5 different ringer tones. You can also set a different ringer tone for incoming call and intercom call. To set, follow as below:

- enter sub-menu "HANDSET" which is in the main menu, search for "EXT RING" for the

incoming call, or "INT RING" for the intercom call. Press				and set the desired tone by
the RD	or	keys. Press	to confirm.
Base ringer volume setting
Set up to	5 different volume levels or disable ringer (base will not ring). To set, follow as

below:

- enter sub-menu "BASE" which is in the main menu, search for "RINGER ".

Press		and select "VOLUME ". Press	and set the desired volume by RD
or	keys (included for ringer off - "VOL OFF"). Press			to confirm.

11