Shiro SD8141 manual Handset On/Off, Before using the unit, check, To make a call, Pre-dial

Page 9

Handset On/Off

 

 

Press

 

key to switch handset On or put it in the cradle for charging. It will switch On

 

automatically.

 

 

To switch Off, hold and press

 

key for approximately 2 seconds.

 

Before using the unit, check:

1)The installation was performed properly;

2)The batteries have been charged properly;

3) The LCD display "OFF " (press

 

key to switch on handset in case it is off);

 

To make a call

1)Press key for dialing tone (the base LED indicator will light up);

2)Dial the desired number;

3) Press

key or put the handset in the cradle to end a call (the base LED indicator

will be off).

 

 

NOTE: Pressing

key will enable the hands free speaker phone. This key cannot

cease the line.

 

At the end of each call, the LCD screen will display the talk time duration for about 5 seconds.

Pre-dial

1) Dial the outgoing number (press

key if there is an error. The last digit will be

deleted. Alternatively press and hold to delete full number) ;

2) Press

key to send a call. The number will be dial out automatically.

How to answer incoming call

 

1) Press

key when handset rings;

 

2) Press

key to answer directly with the hands free speaker phone.

Automatic answer

When the handset is in the cradle, lift to answer a call.

ATTENTION: If you have Caller ID service, the automatic answer will be disabled. You can decide whether to answer the call.

Adjustment of receiver volume

During a phone conversation, press or RD key to adjust the receiver volume. Choose from 5 volume levels. 1 being the lowest and 5 the highest. The volume indication will disappear from LCD screen after 3 seconds.

8

Image 9
Contents Page Technical data AccessoriesPag MEM button Glance guide to the buttons on your handset. The handsetPhone button OK buttonCaller identification list access key and down arrow Key and symbols descriptionRedial list key / up arrow Hands free speaker phone keyBelt clip Quick guide to the buttons on the base BaseInstallation and Setting Up Installing and using your SD 8141digital cordless telephoneBattery installation AC/DC adaptor installationBattery charging PrecautionsHow to answer incoming call Before using the unit, checkAdjustment of receiver volume Handset On/OffMicrophone mute Using earphonePutting the caller on hold Last number redialNavigation method into menu Date & Time settingHandset ringer tone setting Handset ringer volume settingBase ringer volume setting Keypad lockRinger priority setting Base ringer tone settingTimer enabling/disabling Language display settingTo modify entry memory Phone bookTo delete entry memory To delete all entry memoryDialing mode setting Alarm settingReset to default value PIN code changingPabx code Call barringDisabling call barring Setting LCR Primary How to enable / disable LCRSetting LCR Routable LCR Least Cost RoutingSetting LCR Others Setting LCR SpecialMulti handset configuration Subscription of optional handsetDe-subscribe an handset Multi base configurationIntercommunication between handsets Call transfer between handsetsBaby sitting room monitor Subscribe handset to another base Base search