De-subscribe an handset
Enter sub- menu "BASE" which is in the main menu and search for "ADVANCED". Press
,"PIN " will be displayed. Enter PIN code (0000 default) and press |
| . Look for "DEL HS" | ||||||
and press |
| . The LCD screen will display "HANDSET 1 ". Choose the handset to be | ||||||
deleted and press |
| . "Confirm? " will be displayed. Press |
|
| to confirm. | |||
|
| |||||||
Attention:
are using
Intercommunication between handsets
With 5 handsets, you can do up to 2 intercommunications with 4 handsets and one handset communicating with external line simultaneously.
To call a handset:
1) Press INT key and the handset number you wish to dial.
2) The called handset will ring, press 
key to answer.
3) Press the same key in both handsets to end a call.
Call transfer between handsets
1)When you are using an external line, press the INT key (the line will be put on hold).
2)Enter the handset number where you to wish to transfer the call.
3)When the called handset is picked up, an intercom call will be started.
4)Press 
key to complete the transfer.
If the called handset refuse the call, press INT to obtain an external line again.
Conference call
A conversation with external line can be extended to another handset. To enable the conference call, follow the same operation described for call transfer and when the intercommunication is established, press INT and #. The conference call is now enabled.
Multi base configuration
With the GAP profile, you can subscribe your handset to 4 different DECT bases (also if different brand and model) provided that these are of the same profile. In this mode, it is possible to create an area of wide coverage which, in optimal conditions, allow the use of a handset for a maximum distance of 1200 m.
18